1584930 Festo Servo Motors

Product Details

• Rotor position sensor resolution
  18 bit
• Number of pole pairs
  6
• Max. rotational speed
  5300 1/min
• Rotor position sensor interface
  EnDat® 22
• Motor constants
  1.211 Nm/A
• Motor nominal current
  14.43 A
• Brake DC operating voltage
  24 V
• DC nominal voltage
  565 V
• Type of winding switch
  Star inside
• Degree of protection
  IP65
• Peak torque
  80 Nm
• Permissible radial shaft load
  940 N
• Featherkey shaft design
  DIN 6885 A 10 x 8 x 40
• Temperature monitoring
  PTC resistor
• Nominal rotary speed
  3000 1/min
• Nominal operating voltage DC
  565 V
• Voltage constant, phase-to-phase
  75.4 mVmin
• Storage temperature
  -20 °C ... 60 °C
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Total output inertia moment
  55.7 kgcm²
Electrical connection technology
Plug
Conforms to standard
IEC 60034
Rotor position sensor
Absolute encoder, single-turn
Insulation protection class
F
Phase-phase winding resistance
0.283 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Ambient temperature
-10 °C ... 40 °C
Brake mass moment of inertia
3.8 kgcm²
Stall torque
26.2 Nm
MTTFd, subcomponent
152 years, rotor position sensor
Type code
EMMS-AS
Rotor position sensor measuring principle
Inductive
Brake power consumption
17 W
Motor nominal power
5490 W
Winding inductance phase-phase
3.07 mH
Rating class according to EN 60034-1
S1
Peak current
77.2 A
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Permissible axial shaft load
250 N
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Product weight
21960 g
Relative air humidity
0 - 90 %
Brake holding torque
30 Nm
Nominal torque
17.47 Nm
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Note on materials
RoHS-compliant

1584930 Related Documents