1584924 Festo Servo Motors

Name: 1584924
Brand: Festo

Part#:1584924

Manufacturer:Festo

Alt. Part#:EMMS-AS-190-S-HS-ASB-S1

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-190-S-HS-ASB-S1 Without gear unit. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1584924 Festo price in the box on the right side or send a quick quote.

Product Details

Rotor position sensor
Absolute encoder, single-turn
Max. rotational speed
5300 1/min
Brake DC operating voltage
24 V
Motor nominal current
14.43 A
Voltage constant, phase-to-phase
75.4 mVmin
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Ambient temperature
-10 °C ... 40 °C
Stall torque
26.2 Nm
Product weight
21960 g
Number of pole pairs
6
Temperature monitoring
PTC resistor
Brake power consumption
17 W
DC nominal voltage
565 V
Phase-phase winding resistance
0.283 Ohm
Peak current
77.2 A
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
80 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Note on materials
RoHS-compliant
Rotor position sensor interface
EnDat® 21

Nominal rotary speed

3000 1/min

Nominal operating voltage DC

565 V

Winding inductance phase-phase

3.07 mH

Rating class according to EN 60034-1

Relative air humidity

0 - 90 %

Total output inertia moment

55.7 kgcm²

Brake mass moment of inertia

3.8 kgcm²

MTTFd, subcomponent

152 years, rotor position sensor

Motor constants

1.211 Nm/A

Type of winding switch

Star inside

Storage temperature

-20 °C ... 60 °C

Nominal torque

17.47 Nm

Permissible axial shaft load

250 N

Permissible radial shaft load

940 N

Conforms to standard

IEC 60034

Type code

EMMS-AS

Rotor position sensor measuring principle

Inductive

Insulation protection class

Motor nominal power

5490 W

Rotor position sensor resolution

18 bit

CE marking (see declaration of conformity)

As per EU EMC directive As per EU low voltage directive

Degree of protection

IP65

Brake holding torque

30 Nm

MTTF, subcomponent

76 years, rotor position sensor 4469 years, holding brake

Electrical connection technology

Plug

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric