1584918 Festo Servo Motors

Product Details

• Brake DC operating voltage
  24 V
• Nominal operating voltage DC
  565 V
• Winding inductance phase-phase
  3.07 mH
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Nominal torque
  17.47 Nm
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Note on materials
  RoHS-compliant
• Rotor position sensor
  Absolute encoder, multi-turn
• Temperature monitoring
  PTC resistor
• Motor constants
  1.211 Nm/A
• Rotor position sensor resolution
  19 bit
• Voltage constant, phase-to-phase
  75.4 mVmin
• Degree of protection
  IP54
• Brake holding torque
  30 Nm
• Stall torque
  26.2 Nm
• Product weight
  21960 g
• Number of pole pairs
  6
• Rotor position sensor measuring principle
  Inductive
• Brake power consumption
  17 W
DC nominal voltage
565 V
Type of winding switch
Star inside
Storage temperature
-20 °C ... 60 °C
Ambient temperature
-10 °C ... 40 °C
Permissible axial shaft load
250 N
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Featherkey shaft design
DIN 6885 A 10 x 8 x 40
Rotor position sensor interface
EnDat® 21
Nominal rotary speed
3000 1/min
Motor nominal power
5490 W
Phase-phase winding resistance
0.283 Ohm
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Brake mass moment of inertia
3.8 kgcm²
Permissible radial shaft load
940 N
Electrical connection technology
Plug
Type code
EMMS-AS
Max. rotational speed
5300 1/min
Insulation protection class
F
Motor nominal current
14.43 A
Peak current
77.2 A
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Total output inertia moment
55.7 kgcm²
Peak torque
80 Nm
MTTFd, subcomponent
152 years, rotor position sensor
Conforms to standard
IEC 60034

1584918 Related Documents