1574691 Festo Servo Motors

Product Details

• Rotor position sensor measuring principle
  Inductive
• Motor constants
  1.75 Nm/A
• Rotor position sensor resolution
  19 bit
• Voltage constant, phase-to-phase
  104.41 mVmin
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Brake holding torque
  18 Nm
• Brake mass moment of inertia
  1.2 kgcm²
• MTTFd, subcomponent
  152 years, rotor position sensor
• Conforms to standard
  IEC 60034
• Rotor position sensor interface
  EnDat® 22
• Brake DC operating voltage
  24 V
• Motor nominal power
  5110 W
• Winding inductance phase-phase
  4.65 mH
• Peak current
  51.5 A
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Permissible radial shaft load
  1060 N
• Product weight
  17000 g
• Number of pole pairs
  6
• Temperature monitoring
  PTC resistor
Storage temperature
-20 °C ... 60 °C
Ambient temperature
-10 °C ... 40 °C
Peak torque
67.5 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Type code
EMMS-AS
Max. rotational speed
3830 1/min
Brake power consumption
15.6 W
Phase-phase winding resistance
0.586 Ohm
Motor nominal current
9.96 A
Rating class according to EN 60034-1
S1
Degree of protection
IP65
Nominal torque
17.41 Nm
Permissible axial shaft load
200 N
Electrical connection technology
Plug
Rotor position sensor
Absolute encoder, multi-turn
Nominal rotary speed
2800 1/min
Insulation protection class
F
DC nominal voltage
565 V
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Total output inertia moment
20.108 kgcm²
Stall torque
25.5 Nm
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Note on materials
RoHS-compliant

1574691 Related Documents