1574679 Festo Servo Motors

Name: 1574679
Brand: Festo

Part#:1574679

Manufacturer:Festo

Alt. Part#:EMMS-AS-140-L-HV-RMB

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-140-L-HV-RMB Without gear unit. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1574679 Festo price in the box on the right side or send a quick quote.

Product Details

Number of pole pairs
6
Rotor position sensor interface
EnDat® 22
Brake power consumption
15.6 W
Phase-phase winding resistance
0.586 Ohm
Rotor position sensor measuring principle
Inductive
Max. rotational speed
3830 1/min
Motor constants
1.75 Nm/A
Winding inductance phase-phase
4.65 mH
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Brake mass moment of inertia
1.2 kgcm²
Total output inertia moment
20.108 kgcm²
Permissible axial shaft load
200 N
Type code
EMMS-AS
Nominal rotary speed
2800 1/min
Motor nominal power
5110 W
Motor nominal current
9.96 A
Peak current
51.5 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
25.5 Nm

MTTFd, subcomponent

152 years, rotor position sensor

Rotor position sensor

Absolute encoder, multi-turn

Temperature monitoring

PTC resistor

Insulation protection class

Rotor position sensor resolution

19 bit

Rating class according to EN 60034-1

Relative air humidity

0 - 90 %

Peak torque

67.5 Nm

Permissible radial shaft load

1060 N

Conforms to standard

IEC 60034

Brake DC operating voltage

24 V

DC nominal voltage

565 V

Type of winding switch

Star inside

Voltage constant, phase-to-phase

104.41 mVmin

Degree of protection

IP54

Nominal torque

17.41 Nm

Product weight

17000 g

Storage temperature

-20 °C ... 60 °C

Ambient temperature

-10 °C ... 40 °C

Brake holding torque

18 Nm

MTTF, subcomponent

76 years, rotor position sensor 4469 years, holding brake

Electrical connection technology

Plug

Note on materials

RoHS-compliant

Switching cycles, holding brake

5 million idle actuations (without friction work!)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

Turck - DKF 28-27-1

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric