1574642 Festo Servo Motors

Product Details

• Degree of protection
  IP65
• Peak torque
  27 Nm
• Type code
  EMMS-AS
• Rotor position sensor interface
  EnDat® 22
• Nominal rotary speed
  3900 1/min
• Insulation protection class
  F
• DC nominal voltage
  565 V
• Peak current
  24.4 A
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Brake holding torque
  18 Nm
• Nominal torque
  7.7 Nm
• Switching cycles, holding brake
  5 million idle actuations (without friction work!)
• Rotor position sensor
  Absolute encoder, single-turn
• Temperature monitoring
  PTC resistor
• Motor constants
  1.47 Nm/A
• Motor nominal current
  5.23 A
• Phase-phase winding resistance
  1.6 Ohm
• Storage temperature
  -20 °C ... 60 °C
• Ambient temperature
  -10 °C ... 40 °C
• Total output inertia moment
  9.271 kgcm²
MTTFd, subcomponent
152 years, rotor position sensor
Conforms to standard
IEC 60034
Max. rotational speed
4510 1/min
Brake power consumption
15.6 W
Rotor position sensor resolution
18 bit
Winding inductance phase-phase
9.01 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Relative air humidity
0 - 90 %
Brake mass moment of inertia
1.2 kgcm²
Product weight
10400 g
Note on materials
RoHS-compliant
Number of pole pairs
6
Rotor position sensor measuring principle
Inductive
Brake DC operating voltage
24 V
Motor nominal power
3140 W
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Voltage constant, phase-to-phase
88.71 mVmin
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
11.08 Nm
Permissible axial shaft load
200 N
Permissible radial shaft load
780 N
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Electrical connection technology
Plug

1574642 Related Documents