1574632 Festo Servo Motors

Name: 1574632
Brand: Festo

Festo 1574632 servo motor EMMS-AS-140-S-HV-RR Without gear unit. Ambient temperature: -40 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

Part#:1574632

Manufacturer:Festo

Alt. Part#:EMMS-AS-140-S-HV-RR

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-140-S-HV-RR Without gear unit. Ambient temperature: -40 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1574632 Festo price in the box on the right side or send a quick quote.

Product Details

Rotor position sensor
Resolver
Max. rotational speed
4510 1/min
Motor constants
1.47 Nm/A
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Number of pole pairs
6
Rotor position sensor measuring principle
Inductive
Insulation protection class
F
Motor nominal current
5.23 A
Peak current
24.4 A
Degree of protection
IP54
Ambient temperature
-40 °C ... 40 °C
Peak torque
27 Nm
MTTFd, subcomponent
228 years, rotor position sensor
Conforms to standard
IEC 60034
Nominal rotary speed
3900 1/min
Motor nominal power
3140 W
Phase-phase winding resistance
1.6 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive

Total output inertia moment

8 kgcm²

Type code

EMMS-AS

Temperature monitoring

PTC resistor

Winding inductance phase-phase

9.01 mH

Voltage constant, phase-to-phase

88.71 mVmin

Storage temperature

-20 °C ... 60 °C

Nominal torque

7.7 Nm

MTTF, subcomponent

114 years, rotor position sensor

Product weight

9840 g

Rotor position sensor interface

SIN/COS analog signals

DC nominal voltage

565 V

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Certification

RCM compliance mark c UL us - Recognized (OL)

Permissible radial shaft load

780 N

Electrical connection technology

Plug

Stall torque

11.08 Nm

Permissible axial shaft load

200 N

Note on materials

RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

PKGTAB

Schneider Electric PKGTAB, Load center accessory, QO/Homeline, insulator kit, for ground bars

Schneider Electric

EL1809

Beckhoff HD Ethercat Terminal, 16 Chnnl

Beckhoff