1574630 Festo Servo Motors

Name: 1574630
Brand: Festo

Part#:1574630

Manufacturer:Festo

Alt. Part#:EMMS-AS-140-S-HV-RSB

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-140-S-HV-RSB Without gear unit. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1574630 Festo price in the box on the right side or send a quick quote.

Product Details

Rotor position sensor interface
EnDat® 22
Brake DC operating voltage
24 V
Motor nominal current
5.23 A
Voltage constant, phase-to-phase
88.71 mVmin
Relative air humidity
0 - 90 %
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
27 Nm
MTTFd, subcomponent
152 years, rotor position sensor
Number of pole pairs
6
Max. rotational speed
4510 1/min
Motor nominal power
3140 W
Phase-phase winding resistance
1.6 Ohm
Peak current
24.4 A
Degree of protection
IP54
Total output inertia moment
9.271 kgcm²
Permissible radial shaft load
780 N
Conforms to standard
IEC 60034
Type code
EMMS-AS
Temperature monitoring
PTC resistor
Motor constants
1.47 Nm/A

Rating class according to EN 60034-1

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Brake holding torque

18 Nm

Permissible axial shaft load

200 N

Product weight

10400 g

Note on materials

RoHS-compliant

Rotor position sensor

Absolute encoder, single-turn

Insulation protection class

Rotor position sensor resolution

18 bit

Winding inductance phase-phase

9.01 mH

Storage temperature

-20 °C ... 60 °C

Brake mass moment of inertia

1.2 kgcm²

Stall torque

11.08 Nm

Electrical connection technology

Plug

Rotor position sensor measuring principle

Inductive

Brake power consumption

15.6 W

Nominal rotary speed

3900 1/min

DC nominal voltage

565 V

Type of winding switch

Star inside

CE marking (see declaration of conformity)

As per EU EMC directive As per EU low voltage directive

Ambient temperature

-10 °C ... 40 °C

Nominal torque

7.7 Nm

MTTF, subcomponent

76 years, rotor position sensor 4469 years, holding brake

Switching cycles, holding brake

5 million idle actuations (without friction work!)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric