1574625 Festo Servo Motors

Product Details

• Type code
  EMMS-AS
• Insulation protection class
  F
• Brake power consumption
  15.6 W
• DC nominal voltage
  565 V
• Type of winding switch
  Star inside
• Rotor position sensor interface
  EnDat® 22
• Brake DC operating voltage
  24 V
• Rotor position sensor resolution
  19 bit
• Voltage constant, phase-to-phase
  130.69 mVmin
• Storage temperature
  -20 °C ... 60 °C
• Relative air humidity
  0 - 90 %
• Nominal torque
  9.55 Nm
• Permissible axial shaft load
  200 N
• Electrical connection technology
  Plug
• Featherkey shaft design
  DIN 6885 A 8 x 7 x 40
• Rotor position sensor measuring principle
  Inductive
• Motor nominal power
  2600 W
• Phase-phase winding resistance
  3.39 Ohm
• Rating class according to EN 60034-1
  S1
• Total output inertia moment
  9.271 kgcm²
Brake mass moment of inertia
1.2 kgcm²
Permissible radial shaft load
780 N
MTTFd, subcomponent
152 years, rotor position sensor
Conforms to standard
IEC 60034
Rotor position sensor
Absolute encoder, multi-turn
Max. rotational speed
3060 1/min
Motor constants
2.166 Nm/A
Motor nominal current
4.4 A
Peak current
15 A
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake holding torque
18 Nm
Stall torque
11.2 Nm
Product weight
10400 g
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Number of pole pairs
6
Temperature monitoring
PTC resistor
Nominal rotary speed
2600 1/min
Winding inductance phase-phase
20.5 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Ambient temperature
-10 °C ... 40 °C
Degree of protection
IP65
Peak torque
25.6 Nm
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Note on materials
RoHS-compliant

1574625 Related Documents