1492397 Festo Process & Media Valves

Name: 1492397
Brand: Festo

Festo 1492397 solenoid valve VZWF-L-M22C-N2-500-V-3AP4-6-R1 force pilot operated, NPT2" connection. Design structure: (* Diaphragm valve, * forced), Type of actuation: electrical, Sealing principle: soft, Assembly position: Magnet standing, Mounting type: Line installa

Part#:1492397

Manufacturer:Festo

Alt. Part#:VZWF-L-M22C-N2-500-V-3AP4-6-R1

Product Lifecycle:Active

Get a quick Quote!

solenoid valve VZWF-L-M22C-N2-500-V-3AP4-6-R1 force pilot operated, NPT2" connection. Design structure: (* Diaphragm valve, * forced), Type of actuation: electrical, Sealing principle: soft, Assembly position: Magnet standing, Mounting type: Line installa

About the manufacturer: Festo is one of the manufacturers that offers Process & Media Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1492397 Festo price in the box on the right side or send a quick quote.

Product Details

Type code
VZWF
Mounting position
Magnet, upright
Valve function
2/2, closed, monostable
Symbol
00992976
Standard nominal flow rate
29900 l/min
Actuation type
Electrical
Type of mounting
Line installation
Differential pressure
0 bar
Nominal pressure of fitting PN
40
Ambient temperature
-10 °C ... 35 °C
On switching time
1220 ms
Material number of housing
1.4581
Degree of protection
IP65
Design
Diaphragm valve Force pilot operated
Nominal width
50 mm
Coil characteristics
230 V AC: 50/60 Hz, initial power 30.0 VA, holding power 30.0 VA
Temperature of medium
-10 °C ... 80 °C
Housing material
Cast stainless steel
Material of screws
High-alloy stainless steel
Sealing principle
Soft

Fitting connection

2 NPT

Manual override

None

Permissible voltage fluctuations

+/- 10 %

Medium pressure

0 bar ... 6 bar

Leak rate to EN 12266-1

Switching time off

2140 ms

Material number of screw

1.4301

CE marking (see declaration of conformity)

as per EU pressure equipment directive As per EU low voltage directive

Electrical connection

Form A Rectangular design

Flow direction

Non-reversible

Medium

Compressed air as per ISO 8573-1:2010 [7:-:-] Other flow media on request

Max. viscosity

22 mm²/s

Flow rate Kv

28 m³/h

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Product weight

6500 g

Seals material

FPM

Corrosion resistance class (CRC)

3 - High corrosion stress

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

Actuator and Sensor Receptacle, Front Mount, , Female M27 multifast Receptacle

Turck

242

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric