Powermatic Associates Logo

1370479 Festo Stepper Motors

1370479 on Powermatic Associates
Festo

Part#:1370479

Alt. Part#:EMMS-ST-57-M-SE-G2

Manufacturer:Festo

Category:Stepper Motors

Product Lifecycle:Active

Product description

stepper motor EMMS-ST-57-M-SE-G2 Without gearing, without brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

Product Details

  • Step angle tolerance
    ±5%
  • Max. rotational speed
    1940 1/min
  • Phase winding resistance
    0.25 Ohm
  • Voltage constant, phase
    25.5 mVmin
  • Degree of protection
    IP54
  • Thermal class according to EN 60034-1
    B
  • Permissible axial shaft load
    10 N
  • Note on materials
    RoHS-compliant
  • Motor nominal current
    5 A
  • Corrosion resistance class (CRC)
    1 - Low corrosion stress
  • Certification
    RCM compliance mark c UL us - Recognized (OL)
  • Permissible radial shaft load
    52 N
  • Electrical connection technology
    Plug
  • Type code
    EMMS-ST
  • Rotor position sensor measuring principle
    Optical
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Relative air humidity
    0 - 85 %
  • Total output inertia moment
    0.48 kgcm²
  • Product weight
    1200 g
  • Rotor position sensor interface
    RS422 TTL A/B channels + zero index
  • Nominal operating voltage DC
    48 V
  • Rating class according to EN 60034-1
    S1
  • Storage temperature
    -20 °C ... 70 °C
  • Brake holding torque
    1 Nm
  • Conforms to standard
    IEC 60034
  • Step angle with full step
    1.8 deg
  • Rotor position sensor
    Incremental encoder
  • Insulation protection class
    B
  • Winding inductance phase
    0.95 mH
  • Ambient temperature
    -10 °C ... 50 °C
  • Motor holding torque
    1.4 Nm
  • Rotor mass moment of inertia
    0.48 kgcm²

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

1370479 Related Documents

1370479 DataSheet.pdf

Similar products from: Festo Stepper Motors

1370481 on Powermatic Associates

1370481

Festo

stepper motor EMMS-ST-57-M-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

1 in stock

Manufacturer warranty

1370479 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 1370479 with other Stepper Motors products

Step angle tolerance

Max. rotational speed

Phase winding resistance

Voltage constant, phase

Degree of protection

Thermal class according t...

Permissible axial shaft l...

Note on materials

Motor nominal current

Corrosion resistance clas...

Selected product

1370479
Backordered
1370479
Festo

stepper motor EMMS-ST-57-M-SE-G2 Without gearing, without brake. Ambient temperature: -10 - 50 °C, S...

Step angle tolerance±5%

Max. rotational speed1940 1/min

Phase winding resistance0.25 Ohm

Voltage constant, phase25.5 mVmin

Degree of protectionIP54

Thermal class according to EN 60034-1B

Permissible axial shaft load10 N

Note on materialsRoHS-compliant

Motor nominal current5 A

Corrosion resistance class (CRC)1 - Low corrosion stress

1370481
1 in stock
1370481
Festo

stepper motor EMMS-ST-57-M-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, St...

Step angle tolerance±5%

Max. rotational speed1940 1/min

Phase winding resistance0.25 Ohm

Voltage constant, phase-

Degree of protection-

Thermal class according to EN 60034-1-

Permissible axial shaft load-

Note on materials-

Motor nominal current5 A

Corrosion resistance class (CRC)-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

A stepper motor is an electromechanical device that transforms electrical pulses into accurate mechanical motion in set angular steps.

Stepper Motors

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

stepper motor EMMS-ST-57-M-SE-G2 Without gearing, without brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

Similar products from: Stepper Motors

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock