Powermatic Associates Logo

1370477 Festo Stepper Motors

1370477 on Powermatic Associates
Festo

Part#:1370477

Alt. Part#:EMMS-ST-57-S-SEB-G2

Manufacturer:Festo

Category:Stepper Motors

Product Lifecycle:Active

Product description

stepper motor EMMS-ST-57-S-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

Product Details

  • Step angle tolerance
    ±5%
  • Winding inductance phase
    0.5 mH
  • Corrosion resistance class (CRC)
    1 - Low corrosion stress
  • Ambient temperature
    -10 °C ... 50 °C
  • Total output inertia moment
    0.3 kgcm²
  • Permissible axial shaft load
    10 N
  • Note on materials
    RoHS-compliant
  • Rotor position sensor
    Incremental encoder
  • Rotor position sensor interface
    RS422 TTL A/B channels + zero index
  • Brake DC operating voltage
    24 V
  • Nominal operating voltage DC
    48 V
  • Rating class according to EN 60034-1
    S1
  • Thermal class according to EN 60034-1
    B
  • Brake mass moment of inertia
    0.01 kgcm²
  • Step angle with full step
    1.8 deg
  • Brake power consumption
    8 W
  • Phase winding resistance
    0.15 Ohm
  • Storage temperature
    -20 °C ... 70 °C
  • Motor holding torque
    0.8 Nm
  • Electrical connection technology
    Plug
  • Type code
    EMMS-ST
  • Rotor position sensor measuring principle
    Optical
  • Insulation protection class
    B
  • Motor nominal current
    5 A
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Degree of protection
    IP54
  • Certification
    RCM compliance mark c UL us - Recognized (OL)
  • Rotor mass moment of inertia
    0.29 kgcm²
  • Permissible radial shaft load
    52 N
  • Max. rotational speed
    2720 1/min
  • Voltage constant, phase
    12 mVmin
  • Relative air humidity
    0 - 85 %
  • Brake holding torque
    0.4 Nm
  • Product weight
    1150 g
  • Conforms to standard
    IEC 60034

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

1370477 Related Documents

1370477 DataSheet.pdf

Similar products from: Festo Stepper Motors

1370481 on Powermatic Associates

1370481

Festo

stepper motor EMMS-ST-57-M-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

1 in stock

Manufacturer warranty

1370477 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 1370477 with other Stepper Motors products

Step angle tolerance

Winding inductance phase

Corrosion resistance clas...

Ambient temperature

Total output inertia mome...

Permissible axial shaft l...

Note on materials

Rotor position sensor

Rotor position sensor int...

Brake DC operating voltag...

Selected product

1370477
Backordered
1370477
Festo

stepper motor EMMS-ST-57-S-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, St...

Step angle tolerance±5%

Winding inductance phase0.5 mH

Corrosion resistance class (CRC)1 - Low corrosion stress

Ambient temperature-10 °C ... 50 °C

Total output inertia moment0.3 kgcm²

Permissible axial shaft load10 N

Note on materialsRoHS-compliant

Rotor position sensorIncremental encoder

Rotor position sensor interfaceRS422 TTL A/B channels + zer...

Brake DC operating voltage24 V

1370481
1 in stock
1370481
Festo

stepper motor EMMS-ST-57-M-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, St...

Step angle tolerance±5%

Winding inductance phase-

Corrosion resistance class (CRC)-

Ambient temperature-

Total output inertia moment-

Permissible axial shaft load-

Note on materials-

Rotor position sensorIncremental encoder

Rotor position sensor interfaceRS422 TTL A/B channels + zer...

Brake DC operating voltage24 V

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

A stepper motor is an electromechanical device that transforms electrical pulses into accurate mechanical motion in set angular steps.

Stepper Motors

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

stepper motor EMMS-ST-57-S-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

Similar products from: Stepper Motors

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock