1370474 Festo Stepper Motors

Name: 1370474
Brand: Festo

Festo 1370474 stepper motor EMMS-ST-57-S-S-G2 Without gearing, without brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

Part#:1370474

Manufacturer:Festo

Alt. Part#:EMMS-ST-57-S-S-G2

Product Lifecycle:Active

Get a quick Quote!

stepper motor EMMS-ST-57-S-S-G2 Without gearing, without brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

About the manufacturer: Festo is one of the manufacturers that offers Stepper Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1370474 Festo price in the box on the right side or send a quick quote.

Product Details

Step angle with full step
1.8 deg
Motor nominal current
5 A
Storage temperature
-20 °C ... 70 °C
Ambient temperature
-10 °C ... 50 °C
Rotor mass moment of inertia
0.29 kgcm²
Conforms to standard
IEC 60034
Max. rotational speed
2720 1/min
Nominal operating voltage DC
48 V
Rating class according to EN 60034-1
S1
Degree of protection
IP54
Motor holding torque
0.8 Nm
Product weight
870 g
Step angle tolerance
±5%
Voltage constant, phase
12 mVmin
Relative air humidity
0 - 85 %
Total output inertia moment
0.29 kgcm²
Electrical connection technology
Plug
Type code
EMMS-ST
Phase winding resistance
0.15 Ohm
Corrosion resistance class (CRC)
1 - Low corrosion stress

Thermal class according to EN 60034-1

Brake holding torque

0.4 Nm

Permissible radial shaft load

52 N

Insulation protection class

Winding inductance phase

0.5 mH

CE marking (see declaration of conformity)

As per EU EMC directive

Certification

RCM compliance mark c UL us - Recognized (OL)

Permissible axial shaft load

10 N

Note on materials

RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

1370481

$961.57

Verified stock: 1

stepper motor EMMS-ST-57-M-SEB-G2 Without gear unit/with brake. Ambient temperature: -10 - 50 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 85 %, Conforms to standard: IEC 60034, Insulation protection class: B

Festo

DGST-10-80-Y12A

Verified stock: 0

Festo 8085169, Mini slide, configuration: DGST-10-80-Y12A

Festo

DGST-8-50-Y12A

Verified stock: 0

Festo Mini slide DGST-10-50-Y12A Stroke: 50 mm, Adjustable end-position range/front length: 15,1 mm, Adjustable end-position range/rear length: 15,3 mm, Piston diameter: 10 mm, Operating mode of drive unit: Yoke

Festo

DGST-16-150-Y12A

Verified stock: 0

Festo 8085182, Mini slide, configuration: DGST-16-150-Y12A

Festo

VTUG-18-MSD-B1H-25V20-Q10L-U-Q8S-3E3L+HM2

Verified stock: 0

Festo VTUG valve manifold - 573606 - configuration: VTUG-18-MSD-B1H-25V20-Q10L-U-Q8S-3E3L+HM2

Festo

What can I help you find today?

Recommended parts

QOB210

Square D by Schneider Electric QOB210 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 10A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 14-8AWG for 1 cable Al/Cu. It is a 2 Pole device with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are of the press plate type.

Schneider Electric

MQDC1-506

Banner Engineering MQDC1-506 is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.6mm diameter PVC cable and a length of 6.5ft (2m). The cable is equipped with a 5-pin Euro-style M12 female straight connector and bare end flying leads for connectivity. The connection nut is made from nickel-plated brass, ensuring durability. This model operates effectively within an ambient air temperature range of -40 to +105°C and offers a degree of protection rated at IP67, making it suitable for challenging environments. The cable's sheathing is black, and it is rated for a voltage of 250Vac.

Banner

184

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

EL1809

Beckhoff HD Ethercat Terminal, 16 Chnnl

Beckhoff

53113530

53113530 - LAPP SKINTOP® COLD Strain Relief Cable Gland - M25 x 1.5

Lapp