Powermatic Associates Logo

FAZ-B10/1-SP Eaton Miniature Circuit Breakers (MCBs)

FAZ-B10/1-SP on Powermatic Associates
Eaton

Part#:FAZ-B10/1-SP

Manufacturer:Eaton

Category:Miniature Circuit Breakers (MCBs)

Product Lifecycle:Active

Get a quick Quote!

FAZ-B10/1-SP Eaton - UL 1077 Industrial Miniature Circuit Breaker - Supplementary Protector

About the manufacturer: Eaton is one of the manufacturers that offers Miniature Circuit Breakers (MCBs) that you can order at Powermatic Associates site. At Eaton, we are dedicated to improving quality of life and preserving the environment through power management technologies that emphasize reliability, efficiency, safety, and sustainability. Our attention is on impactful solutions, and we are committed to their success.

Check out the FAZ-B10/1-SP Eaton price in the box on the right side or send a quick quote.

Product Details

  • Voltage
    240/415 volts
  • Terminal Type
    Standard Terminals
  • Number of Poles
    1
  • Amperage
    10 amperes
  • Volts:
    277 VAC at 50/60 Hertz
  • Size:
    0.7 Inch Width x 3.15 Inch Height
  • Amps:
    32 A
  • Mounting:
    DIN Rail
  • Trip Setting:
    3 to 5 x Rated Current
  • Poles:
    1
  • Terminal Type:
    Screw
  • Interrupting Rating:
    10 kA at 277 Volt AC
  • Shipping Weight:
    0.25
  • UPC:
    015081637441
  • Shipping Length:
    4.00 In.
  • Shipping Width:
    3.00 In.
  • Approval:
    UL 1077
  • Shipping Height:
    1.00 In.
  • Type:
    Current Limiting
  • Series:
    FAZ
  • Number of poles
    Single-pole
  • Trip Type
    3-5X /n
  • Amperage Rating
    10 A
  • Application
    Suitable for applications where low levels of inrush current are expected
  • Voltage rating
    240/415V
  • Terminals
    Standard
  • Quantity
    38
  • Frequency rating
    50-60 Hz
  • Circuit protection
    B curve
  • Type
    UL 1077 Industrial miniature circuit breaker - supplementary protector
  • Interrupt rating
    15 kAIC
  • Catalog Notes
    For applications that require protection due to potential wiring damage at low fault conditions. Single packaging of single-pole curves for select amperages only.
  • Special features
    Single package
  • Product Width
    3 in
  • Product Length/Depth
    1 in
  • EAN
    4015081637447
  • Catalog Number
    FAZ-B10/1-SP
  • Product Weight
    .1 lb
  • Certifications
    UL 1077 IEC 60947-2 CSA Std. C22.2 No.235
  • Product Name
    Eaton FAZ supplementary protector
  • Warranty
    1 year
  • Product Height
    3.5 in

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents FAZ-B10/1-SP Specs

FAZ-B10/1-SP Catalog.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

QS10.121 on Powermatic Associates

QS10.121

Verified stock: 4

PULS QS10.121 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. The unit is equipped with a DC-OK relay contact output and offers a rated current of 15A at 12Vdc and 13.5A at 15Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values across a wide spectrum. The QS10.121, part of the Q-series, measures 60mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, delivering a rated power of 203W at 15V, 180W at 12V, and can momentarily supply up to 270W for 4 seconds. The output voltage is adjustable between 12Vdc and 15Vdc, featuring comprehensive protection functions including overvoltage and overload/short-circuit protection. The unit allows for series or parallel operation to increase output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, achieving up to 0.918 at 230Vac. It exhibits a peak current consumption of 10A, with a start-up delay between 340-800ms and a hold time of 32ms at nominal input conditions. Power dissipation stands at approximately 16.1W to 16.7W under full load conditions, and the electrical durability ranges significantly based on operating conditions, with up to 215000 hours at 25°C and 30A output with 1AC 230Vac input. The output stage capacitance is 7000µF, and ripple is maintained at 50mVpp across a 20Hz to 20MHz range.

Puls

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1