T8AN6RQ

Banner

Product Lifecycle: Active

Banner Engineering T8AN6RQ is a photo-electric sensor from the T8 series designed with a through-beam system, functioning as the receiver component of the opposed mode setup. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6-inch (150mm) pigtail that terminates with a 3-pin Pico-style M8 connector. This sensor operates within a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed to work within an ambient air temperature range of -20 to +55°C and offers a degree of protection rated at IP67 NEMA 6, making it suitable for various environmental conditions. The T8AN6RQ has a cylindrical M8 threaded/barrel shape, includes 1 x digital output (NPN transistor), and provides a sensing distance of up to 2 meters. It emits visible red light with a wavelength of 660 nm and has a response time of 1ms (0.001 s). Its operating mode is Light-ON NO (Normally Open), and it features an M8 thread size.

T8AN6RQ

Banner Engineering T8AN6RQ is a photo-electric sensor from the T8 series designed with a through-beam system, functioning as the receiver component of the opposed mode setup. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6-inch (150mm) pigtail that terminates with a 3-pin Pico-style M8 connector. This sensor operates within a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed to work within an ambient air temperature range of -20 to +55°C and offers a degree of protection rated at IP67 NEMA 6, making it suitable for various environmental conditions. The T8AN6RQ has a cylindrical M8 threaded/barrel shape, includes 1 x digital output (NPN transistor), and provides a sensing distance of up to 2 meters. It emits visible red light with a wavelength of 660 nm and has a response time of 1ms (0.001 s). Its operating mode is Light-ON NO (Normally Open), and it features an M8 thread size.

T8 Series, Opposed-Mode Models.pdf

T8 E/R CABLE/PIGTAIL.stp

T8 E/R CABLE/PIGTAIL.pdf

Product details

T8 Series, Opposed-Mode Models.pdf

T8 E/R CABLE/PIGTAIL.stp

T8 E/R CABLE/PIGTAIL.pdf

Feature: Hazardous AreaNo
Feature: Chemical ResistantNo
Feature: EncapsulatedNo
Barrel Diameter (mm)8
Special Feature: Intrinsically SafeNo
IO LinkNo

DeviceNetNo

Feature: AudibleNo

Feature: Timing (Hold/Delay)No

Opposed Mode Emitter/ReceiverReceiver

IndicatorLEDs

Max Op. Relative Humidity [%]90% @ 50°C

AdjustmentsN/A

NEMA RatingNEMA 6

Lens MaterialAcrylic

IP RatingIP67

Repeatability (µs)100

Number of Pins3

Output response time (ms)1 ON/0.5 OFF

Special Feature: Remote TeachNo

Max Op. Temp. (°C)55

Delay at Power-up (ms)100

Special Feature: Water DetectionNo

Input/OutputDiscrete

OperationLight Operate

Min Op. Temp. (°C)-20

PowerDC

Quick Disconnect TypeM8 (Pico)

ConnectionPigtail QD

Max Sensing Distance (mm)2000

Primary Housing MaterialThermoplastic

Sensing BeamVisible Red LED

Power Supply/Supply Voltage10-30 V dc

OutputsNPN

Sensing Mode (Detailed)Receiver

Sensing Mode (General)Opposed

Housing StyleBarrel

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

This item can ship within 24h!

XS2RO

Banner Engineering XS2RO is a 2-channel safety relay module designed for ensuring operational safety in various applications. It operates with a supply voltage of 24Vdc and features screw connections for secure installation. This module is protected by an IP20 NEMA 1 rated enclosure, indicating it is protected against solid objects larger than 12.5mm but not against water. It is designed for DIN rail mounting, facilitating easy integration into existing systems. The XS2RO measures 110 mm in height, 129 mm in depth, and 23 mm in width, making it compact for fitting into tight spaces. It can operate within an ambient air temperature range of 0 to +55°C. The module provides 2 safety outputs, each consisting of 2 Normally Open (NO) contacts in series (2NO / 2xSPST-NO each made of 2 N.O. contacts in series; 6A) and 1 auxiliary output composed of 2 Normally Closed (NC) contacts in parallel (1NC / SPST-NC made of 2 N.C. contacts in parallel; 2.5A), resulting in a configuration of 4NO+2NC contacts for comprehensive safety and control.

BWA-QD5.5

Banner Engineering BWA-QD5.5 is a single-ended cable/cordset designed for automation applications, featuring a 5-pin M12 connector on one end and 1/2"-14 NBSM bare end flying leads on the other.

73122

Banner - 73122

WLF12PXRGB1200SQP

Banner - WLF12PXRGB1200SQP

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

This item can ship within 24h!

XS2RO

Banner Engineering XS2RO is a 2-channel safety relay module designed for ensuring operational safety in various applications. It operates with a supply voltage of 24Vdc and features screw connections for secure installation. This module is protected by an IP20 NEMA 1 rated enclosure, indicating it is protected against solid objects larger than 12.5mm but not against water. It is designed for DIN rail mounting, facilitating easy integration into existing systems. The XS2RO measures 110 mm in height, 129 mm in depth, and 23 mm in width, making it compact for fitting into tight spaces. It can operate within an ambient air temperature range of 0 to +55°C. The module provides 2 safety outputs, each consisting of 2 Normally Open (NO) contacts in series (2NO / 2xSPST-NO each made of 2 N.O. contacts in series; 6A) and 1 auxiliary output composed of 2 Normally Closed (NC) contacts in parallel (1NC / SPST-NC made of 2 N.C. contacts in parallel; 2.5A), resulting in a configuration of 4NO+2NC contacts for comprehensive safety and control.

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

Friendly Powermatic robot

What can I help you find today?