T30AW3LP

Banner

Product Lifecycle: Active

Banner Engineering T30AW3LP is a polarized photo-electric sensor from the T30 series designed in a retro-reflective mode. This sensor features a thermoplastic housing and is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3LP offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. It has an M30 cylindrical threaded/barrel shape and includes 1 x digital output (Solid-state AC output; SPST contact type) for connectivity. This sensor provides a sensing distance of up to 6m and uses visible red light with a wavelength of 680 nm for detection. It has a response time of 16ms / 0.016 s and operates in a Light-ON mode, with a thread size of M30.

T30AW3LP

Banner Engineering T30AW3LP is a polarized photo-electric sensor from the T30 series designed in a retro-reflective mode. This sensor features a thermoplastic housing and is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3LP offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. It has an M30 cylindrical threaded/barrel shape and includes 1 x digital output (Solid-state AC output; SPST contact type) for connectivity. This sensor provides a sensing distance of up to 6m and uses visible red light with a wavelength of 680 nm for detection. It has a response time of 16ms / 0.016 s and operates in a Light-ON mode, with a thread size of M30.

T30 LP/FF CABLE/PIGTAIL.stp

T30 LP/FF CABLE/PIGTAIL.pdf

Product details

T30 LP/FF CABLE/PIGTAIL.stp

T30 LP/FF CABLE/PIGTAIL.pdf

Feature: Chemical ResistantNo
DeviceNetNo
AdjustmentsN/A
Feature: AudibleNo
IO LinkNo
Feature: Hazardous AreaNo

Feature: EncapsulatedYes

Feature: Ecolab CertifiedYes

Feature: Timing (Hold/Delay)No

IP RatingIP69

Feature: Washdown RatedYes

Opposed Mode Emitter/ReceiverN/A

IndicatorLEDs

Barrel Diameter (mm)30

NEMA RatingNEMA 6P

Max Op. Relative Humidity [%]90% @ 50°C

Lens MaterialAcrylic

Number of Pins3

Special Feature: Water DetectionNo

Delay at Power-up (ms)100

Special Feature: Remote TeachNo

Repeatability (µs)4000

Special Feature: Intrinsically SafeNo

Output response time (ms)16

Max Op. Temp. (°C)70

OperationLight Operate

Min Op. Temp. (°C)-40

Sensing Mode (Detailed)Polarized

Housing StyleBarrel

Primary Housing MaterialThermoplastic

Cable Length (m)2

Quick Disconnect TypeNo QD

ConnectionCable

Power Supply/Supply Voltage20-250 V ac

OutputsSolid-State AC Switch

Max Sensing Distance (mm)6000

Input/OutputSolid-State AC Switch

Sensing Mode (General)Retroreflective

PowerAC

Sensing BeamVisible Red LED

Wavelength680 nm

Light ColorVisible red

Response time16ms / 0.016 s

ShapeCylindrical threaded/barrel

Ambient air temperature for operation-40...+70 °C

Compliant with standard(s)cULus cCSAus CE

Thread sizeM30

Degree of protectionIP67 NEMA 6P

Connection typePre-wired with 6.5ft / 2m cable terminated with bare end flying leads

Order code / Manufacturer SKU32493

Digital outputs1 x digital output (Solid-state AC output; SPST contact type)

Materialthermoplastic housing

Product series / family nameEZ-BEAM series

FunctionsPolarized photo-electric sensor green LED (power ON) yellow LED (output state)

Sensing distance6m

Designretro-reflective mode

Main functionSensor (Photo-electric)

Operating modeLight-ON

Sub-range nameT30 series

Primary brandBanner Engineering

Supply voltage (AC)20Vac-250Vac (200Vac / 220Vac / 240Vac nom.)

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

This item can ship within 24h!

T30AW3FF600Q1

Banner Engineering T30AW3FF600Q1 is a fixed-field photo-electric sensor from the T30 series, designed with a background suppression system. This sensor features a thermoplastic housing and is pre-equipped with a 4-pin 1/2" micro connector for connectivity. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3FF600Q1 offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. Its M30 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of 600mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

BWA-QD5.5

Banner Engineering BWA-QD5.5 is a single-ended cable/cordset designed for automation applications, featuring a 5-pin M12 connector on one end and 1/2"-14 NBSM bare end flying leads on the other.

73122

Banner - 73122

WLF12PXRGB1200SQP

Banner - WLF12PXRGB1200SQP

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

This item can ship within 24h!

T30AW3FF600Q1

Banner Engineering T30AW3FF600Q1 is a fixed-field photo-electric sensor from the T30 series, designed with a background suppression system. This sensor features a thermoplastic housing and is pre-equipped with a 4-pin 1/2" micro connector for connectivity. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3FF600Q1 offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. Its M30 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of 600mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

Friendly Powermatic robot

What can I help you find today?