Powermatic Associates Logo

1SAM340000R1007 ABB Control Manual Motor Protectors

1SAM340000R1007 on Powermatic Associates
ABB Control

Part#:1SAM340000R1007

Manufacturer:ABB Control

Category:Manual Motor Protectors

Product Lifecycle:Active

Product description

ABB 1SAM340000R1007 is a protection unit designed with thermal-magnetic circuit breaker functionality for transformer primary protection. It features screw-clamp connections and offers an adjustable rated current ranging from 1.6A to 2.5A. This unit operates within an ambient air temperature range for operation of -25 to +70°C and for storage from -50 to +80°C. It is equipped with a control voltage (DC) rating of IP20 and a rated impulse voltage (Uimp) of 6 kV. The device has a net width of 45 mm and provides protection with three poles (3P). It is designed for short circuit protection, phase failure/loss, and transformer protection with a rated insulation voltage (Ui) of 690 V. The control voltage (AC) stands at 86.75 mm, and it is capable of mounting on DIN rails or mounting plates. The operating mode is rated for 100,000 operations, with an ON/OFF/TRIP rotary knob for flow control. The unit's length supports 100,000 operations, and it features thermal protection (overload) with adjustable settings of 1.6A to 2.5A.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

About the product

ABB 1SAM340000R1007 is a protection unit designed with thermal-magnetic circuit breaker functionality for transformer primary protection. It features screw-clamp connections and offers an adjustable rated current ranging from 1.6A to 2.5A. This unit operates within an ambient air temperature range for operation of -25 to +70°C and for storage from -50 to +80°C. It is equipped with a control voltage (DC) rating of IP20 and a rated impulse voltage (Uimp) of 6 kV. The device has a net width of 45 mm and provides protection with three poles (3P). It is designed for short circuit protection, phase failure/loss, and transformer protection with a rated insulation voltage (Ui) of 690 V. The control voltage (AC) stands at 86.75 mm, and it is capable of mounting on DIN rails or mounting plates. The operating mode is rated for 100,000 operations, with an ON/OFF/TRIP rotary knob for flow control. The unit's length supports 100,000 operations, and it features thermal protection (overload) with adjustable settings of 1.6A to 2.5A.

Similar products from: ABB Control Manual Motor Protectors

Manufacturer warranty

1SAM340000R1007 ABB Control

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

ABB Control

ABB's Industrial Automation division offers a variety of solutions designed for process and hybrid industries, including industry-specific integrated automation, electrification, and digital solutions, control technologies, software, and advanced services.

Relevant products

1SAM340000R1013 on Advantage Electric Supply

1SAM340000R1013

Verified stock: 0

ABB 1SAM340000R1013 is a protection unit designed with thermal-magnetic circuit breaker functionality for transformer primary protection. It features screw-clamp connections and offers an adjustable rated current of 16A to 20A. This unit is designed to operate within an ambient air temperature range of -25 to +70°C for operation and -50 to +80°C for storage. It supports a control voltage (DC) of IP20 and has a rated impulse voltage (Uimp) of 6 kV. The device measures 97.8 mm in net width, with poles extending 45 mm, and incorporates 3-poles (3P) for protection functions including short circuit protection, phase failure or loss, and transformer protection. The net depth is 690 V, and the control voltage (AC) stands at 86.55 mm. It is capable of mounting on DIN rails or mounting plates, with a primary current of 690 V and an operating mode designed for 50,000 operations. The unit features an ON/OFF/TRIP rotary knob for flow control, supports up to 100,000 operations in length, and offers thermal protection for overloads adjustable between 16A and 20A.

ABB Control

1SAM350005R1013 on Advantage Electric Supply

1SAM350005R1013

Verified stock: 0

ABB 1SAM350005R1013 is a Motor Protection Circuit Breaker (MPCB) designed for thermal-magnetic motor protection. It features manual motor starter protector functionality with screw-clamp connections. The rated current is adjustable between 16A and 20A, with specific ratings under UL/CSA for Full Load Amps (FLA) and Locked Rotor Amperes (LRA) across various voltages (200Vac, 208Vac, 220-240Vac, 440-480Vac, 550-600Vac). It includes Normally Open (NO) auxiliary contacts and is designed for a supply voltage (AC) of 550-600Vac. The MPCB offers a degree of protection with front-mounted auxiliary contact blocks (1NO+1NC) and operates within an ambient air temperature range of -25 to +70°C. It is equipped with a 3-pole (3P) configuration, rated insulation voltage (Ui) of 690V, and an IP20 protection rating. The device has a net width of 97.8mm, power consumption of 6kV, and is colored with a 45mm dimension. It supports a connection capacity of 7.5kW (400/415Vac) and is designed for a network frequency of 50Hz. The MPCB is capable of 50,000 operations, with a mechanical durability of 100,000 operations at no load. It features short circuit protection, phase failure/loss, and thermal overload Class 10 protection, with an operating rate that includes both thermal and magnetic (adjustable) protection mechanisms. The magnetic protection has a short-circuit pickup current fixed at 300A, while the thermal protection allows for an overload setting of 16A to 20A (adjustable). This part mounts on a DIN rail or mounting plate and is designed for use in environments with a climatic resistance of 100,000 operations.

ABB Control

What can I help you find today?

Recommended parts

LC1D95M7 on Advantage Electric Supply

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
GV2P14 on Advantage Electric Supply

GV2P14

Schneider Electric

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

12 in stock