Industrial Automation Components - HMS Networks

HMS eWon component

Industrial Internet Router w/antenna (Ethernet + WiFi 802.11 b/g/n)

Ewon by HMS Networks E-014 is a power supply unit categorized under the Accessories sub-range. This PSU is designed to operate with a supply voltage range of 100Vac-240Vac, accommodating nominal voltages of 110Vac, 120Vac, 200Vac, and 230Vac at a frequency of 50-60Hz. It has a rated input current of 310mA.

Anybus by HMS Networks AB7314-B is a gateway designed for CAN communicators within the sub-range of CAN-based communication. This part supports configurable CAN protocols 1.0 / 2.0A and 2.0B, with a baud rate ranging from 20kbit/s to 1Mbit/s. It is built to withstand industrial environments, featuring reverse voltage protection, short circuit protection, and galvanic isolation on the sub-network. The installation altitude capability reaches up to 2000m. It is designed to handle immunity and emission for industrial environments, including electrostatic discharge protection of +/-4kV, electromagnetic RF fields resistance from 10V/m at 80MHz-1GHz to 1V/m at 2.0GHz-2.7GHz, fast transients of +/-1kV, surge protection of +/-1kV, and RF conducted interference of 10V/rms. Emission levels are maintained at 40dB from 30MHz to 230MHz and 47dB from 30MHz to 1GHz. The design incorporates CAN + ControlNet with 2 x configuration switches (A / B), 6 x LED indicators for various statuses, and supports a supply voltage of 21.6-26.4Vdc (24Vdc nominal). Dimensions are H120mm x W27mm x D75mm, with a plastic housing made from ABS / PC. Connection types include 2 x ControlNet channel connectors, 1 x 9-pin D-sub male connector for CAN, 1 x 2-poles plug-in connector for power, 1 x USB connector for the sub-network, and 1 x NAP connector. It offers a degree of protection of IP20 NEMA 1 and is suitable for DIN rail mounting. The communication protocol includes CAN and ControlNet, with an ambient air temperature for operation ranging from -25 to +55°C. Current consumption is 300mA (max) and 100mA (typical) at 24Vdc. It is designed for storage in temperatures ranging from -40 to +85°C, with a humidity tolerance of 5-95% RH (non-condensing). The speed capabilities are 20kbit/s to 1Mbit/s for CAN and 5Mbit/s for ControlNet.

Anybus by HMS Networks AB7516-F is a gateway designed for protocol translation within the X-gateway series. It functions as an Interbus CU slave and a PROFINET-IRT device, featuring Ethernet dual-port cut-through switch. The device is configured via a USB port using Anybus Configuration Manager software and supports installation in both vertical and flat positions. It includes galvanic isolation on both BUS/Ethernet sides and offers a baud rate that can be adjusted via a jumper. The gateway is equipped with 10 LED indicators for monitoring fieldbus, sub-network, and device status. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and has dimensions of H127mm x W44mm x D114mm. The housing is made of aluminium and plastic, ensuring compatibility with 2 x RJ45 connectors for 10/100Mbit/s Ethernet (full duplex, fixed), 1 x 9-pin D-sub male connector for Interbus (bus-in), 1 x 9-pin D-sub female connector for Interbus (bus-out), 1 x 2-poles 5.08mm plug-in screw connector for power (X3), and 1 x USB connector (X4). It offers a degree of protection of IP20 NEMA 1 and is designed for DIN rail mounting. The AB7516-F supports the INTERBUS and PROFINET communication protocols, operates within an ambient air temperature range of -25...+65°C, and consumes a maximum of 400mA current at 24Vdc (200mA typical). It is designed for storage in temperatures ranging from -40...+85°C and can operate in environments with 5-95% relative humidity (non-condensing). The speed supported is 10/100Mbit/s for PROFINET and 500kbit/s to 2Mbit/s for INTERBUS.

Anybus by HMS Networks AB7521-F is a gateway belonging to the X-gateway series designed as a protocol translator between different industrial networks. It features a PROFIBUS master and a POWERLINK device, enabling seamless communication and integration. The gateway is equipped with 10 LED indicators for real-time status monitoring of fieldbus, sub-network, and device operations. It supports a supply voltage range of 19.2-28.8Vdc, with a nominal 24Vdc, and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, ensuring durability while maintaining a lightweight design. For connectivity, it includes 2 RJ45 connectors for 100Mbit/s Ethernet (half duplex), 1 9-pin D-sub female connector for PROFIBUS, 1 9-pin D-sub male connector for PROFIBUS and RS-232 configuration, 1 2-poles 5.08mm plug-in screw connector for power, and 1 USB connector for I/O configuration via Anybus Configuration Manager software. The AB7521-F offers galvanic isolation on both BUS and Ethernet sides to protect against electrical interference and is designed for vertical or flat installation with DIN rail mounting. It has an IP20 and NEMA 1 degree of protection, operates within an ambient air temperature range of -25 to +65 °C, and can be stored in temperatures ranging from -40 to +85 °C. The current consumption is 400mA (max) and 200mA (typical) at 24Vdc. Communication speeds are up to 100Mbit/s for POWERLINK and up to 12Mbit/s for PROFIBUS, with a humidity tolerance of 5-95% RH (non-condensing).

Anybus by HMS Networks AB7671-F is a gateway within the X-gateway series designed for protocol translation. It functions as an EtherNet/IP scanner and PROFIBUS slave. This part allows for I/O configuration via a USB port using the Anybus Configuration Manager software and requires installation in a vertical or flat position with galvanic isolation on both the BUS and Ethernet sides. It features 8 IP configuration switches, 2 node address switches (x10 / x1), and 10 LED indicators for fieldbus, sub-network, and device status monitoring. The AB7671-F operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and has dimensions of H127mm x W44mm x D114mm. Its housing is made from aluminium and plastic, ensuring compatibility with its designated environment. Connection options include 1 x RJ45 LAN connector for 10/100Mbit/s Ethernet/IP (supporting both full and half duplex), 1 x 9-pin D-sub female connector for PROFIBUS, 1 x 2-poles 5.08mm plug-in screw connector for power (X3), and 1 x USB connector (X4). The AB7671-F is designed for DIN rail mounting and offers a degree of protection rated at IP20 NEMA 1. It supports communication protocols such as Ethernet/IP and PROFIBUS, with operational speeds of 10/100Mbit/s (Ethernet) and up to 12Mbit/s (PROFIBUS). The device is designed to operate within an ambient air temperature range of -25...+65 °C, with a current consumption of 400mA (max) and 200mA (typical) at 24Vdc. It can be stored in temperatures ranging from -40...+85 °C and operates effectively in 5-95% relative humidity (RH; non-condensing).

Anybus by HMS Networks AB7825-F is a gateway belonging to the X-gateway series designed for protocol translation. It functions as an AS-Interface master and Interbus CU slave, featuring vertical or flat installation positions with galvanic isolation on both BUS/Ethernet sides. The I/O configuration is manageable via a USB port using Anybus Configuration Manager software. This model includes 10 LED indicators for fieldbus, sub-network, and device status, alongside one on-board configuration button and a baud rate jumper. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and measures H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, with connection options including one 9-pin D-sub male connector for serial RS-232 configuration, one 9-pin D-sub male connector and one 9-pin D-sub female connector for Interbus bus-in and bus-out respectively, one 2-poles 5.08mm plug-in screw connector for power, and one USB connector. It offers an IP20 NEMA 1 degree of protection and is suitable for DIN rail mounting. The communication protocols supported are AS-interface and INTERBUS, with an ambient air temperature for operation ranging from -25 to +65°C. The current consumption is 400mA (max) and 200mA (typical) at 24Vdc, with an ambient air temperature for storage between -40 and +85°C. The speed supported is 167kbit/s for AS-interface and 500kbit/s to 2Mbit/s for INTERBUS, in environments with 5-95% relative humidity (non-condensing).

Anybus by HMS Networks AB7879-F is a gateway belonging to the X-gateway series designed for protocol translation. It functions as both a CC-Link slave and FIPIO slave, featuring vertical or flat installation positions with galvanic isolation on both BUS/Ethernet sides. Configuration is managed via a USB port using the Anybus Configuration Manager software. The device includes 2 node address switches (x10 / x1), 2 station address switches (x10 / x1), a baud rate switch, and 10 LED indicators for fieldbus, sub-network, and device status monitoring. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and has dimensions of H127mm x W44mm x D114mm. The housing is made of aluminium and plastic, and connection options include a 9-pin D-sub male connector for FIPIO, a 5-pin CC-Link connector, a 2-poles 5.08mm plug-in screw connector for power, and a USB connector. It offers an IP20 NEMA 1 degree of protection and is designed for DIN rail mounting. The AB7879-F supports CC-Link and FIPIO communication protocols, operates within an ambient air temperature range of -25 to +65 °C, and consumes a maximum of 400mA (24Vdc) or typically 200mA. Storage temperature ranges from -40 to +85 °C. Communication speeds are 1Mbit/s for FIPIO and 156kbit/s to 10Mbit/s for CC-Link, with a humidity tolerance of 5-95% RH (non-condensing).

Anybus by HMS Networks AB7957-F is a gateway designed for protocol translation within the X-gateway series. It functions as an EtherNet/IP scanner and CC-Link IE Field slave, featuring vertical or flat installation positions with galvanic isolation on both BUS/Ethernet sides. Configuration is managed via a USB port using Anybus Configuration Manager software. The device includes 8 configuration switches, 8 IP configuration switches, and 10 LED indicators for fieldbus, sub-network, and device status monitoring. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and has dimensions of H127mm x W44mm x D114mm. The housing is made of aluminium and plastic, ensuring durability. Connection options include 2 x RJ45 CC-Link IE Field connectors, 1 x RJ45 LAN connector for 10/100Mbit/s Ethernet (supporting both full and half duplex), 1 x 2-poles 5.08mm plug-in screw connector for power, and 1 x USB connector for configuration. It offers an IP20 and NEMA 1 degree of protection and is designed for DIN rail mounting. The AB7957-F supports CC-Link and Ethernet/IP communication protocols, operates within an ambient air temperature range of -25 to +65 °C, and consumes a maximum of 400mA current at 24Vdc (200mA typical). Storage temperature ranges from -40 to +85 °C. The gateway facilitates speeds of 1Gbit/s for CC-Link IE Field and 10/100Mbit/s for Ethernet, and is designed to operate in environments with 5-95% relative humidity (non-condensing).