Name: BIM-IKE-AP6X-H1141 W/KLI3
Brand: Turck
Price: 110.8 USD
Availability: InStock

This item can ship within 24h!

I55AE137B1AV11003S

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

LenzeSTOCK: 60

This item can ship within 24h!

541333

connecting cable NEBU-M8G3-K-2.5-LE3 for proximity sensors, position transmitter, pressure switch, flow sensors, visual and inductive sensors. Conforms to standard: (* Core colours and connection numbers to EN 60947-5-2, * EN 61076-2-104), Cable identific

FestoSTOCK: 3

This item can ship within 24h!

BI5-M18E-AN6X-H1141

Turck BI5-M18E-AN6X-H1141 is an inductive proximity sensor belonging to the BI...-M18 series. This sensor features an extended barrel embeddable design with a chrome-plated brass housing and is pre-equipped with a 4-pin M12 Eurofast QD male connector. It operates on a supply voltage of 10-30Vdc, with nominal voltages of 12Vdc and 24Vdc. The sensor has a shape of an M18 partially threaded extended cylindrical/barrel and offers a degree of protection rated at IP67. It can operate at a maximum switching frequency of 1kHz / 1000Hz and has an ambient air temperature range for operation between -25°C and +70°C. The response time of the sensor is 8ms / 0.008 s, and it includes 1 x digital output (10-30Vdc; NPN; 200mA max.). The sensing distance is 5mm, and it features protection functions against short-circuit (pulsed), overload, and reverse polarity. The control circuit rated current is 200mA / 0.2 A, with a thread size of M18, and operates in a NO (Normally Open) mode.

TurckSTOCK: 64

This item can ship within 24h!

CP10.241-S2

PULS CP10.241-S2 is a DIN rail mounting power supply unit with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C and has a net width of 39 mm. The current consumption varies with input voltage, being 1.13A at 230Vac input, 2.15A at 120Vac input, 2.6A at 100Vac input, and 2.35A at 110Vdc input, with a peak inrush current of 11A at 230Vac input and 7A at 120Vac input. It offers an IP20 degree of protection and achieves an efficiency of 0.952 at 230Vac input and 0.936 at 120Vac input. The dimensions are W39mm x H124mm x D117mm. The start-up delay ranges from 240-300ms for 100-230Vac input, with a rise time of 30ms under nominal input and full constant current load without load capacitance, and 160ms with 10mF load capacitance. It features protection against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart in case of over-temperature conditions. The unit supports series/parallel operation for increased output voltages or power, and 1+1 redundancy with a redundancy module. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W at 230Vac input and 16.4W at 120Vac input, with an output stage capacitance of 4400µF. Electrical durability varies with conditions, reaching up to 499,000 hours at 40°C and 12A output with 1AC 230Vac input. The ripple is 50mVpp (20Hz...20MHz; 50Ω). This AC/DC power supply unit offers a 20% power reserve and includes ATEX approval, DC-OK relay contact output, and push-in spring connections. The supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. The rated current is 12A at 48Vdc from -25 to +45°C, 10A at 24Vdc from +45 to +60°C, and 7.5A at 24Vdc at +70°C. It is suitable for single-phase (1AC) or DC networks, with a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with linear derating between +60°C and +70°C. The output voltage is adjustable from 24Vdc to 28Vdc, with a 200mV turn-ON overshoot, and a hold time of 37ms at 120/230Vac input.

PulsSTOCK: 4

This item can ship within 24h!

193457

plug socket with cable KMEB-1-24-10-LED pre-assembled, for VUVB, MEBH, MOEBH valves and N2 solenoids. Switching position indicator: LED, Mounting type: On solenoid valve with M2.5 central screw, Assembly position: Any, Product weight: 460 g, Electrical co

FestoSTOCK: 2

This item can ship within 24h!

PIM60.241

PULS PIM60.241 is a power supply unit that functions as an AC/DC PSU/converter with DIN rail mounting. It operates within an ambient air temperature range of -10 to +60°C, with linear derating up to +70°C. The unit features a DC-OK relay contact output and provides a rated current of 3.8A at 24Vdc within -10 to +60°C and 2.8A at 24Vdc at +70°C. It is equipped with push-in spring connections for connectivity and supports a supply voltage range of 90Vac-264Vac across various nominal voltages from 100Vac to 240Vac at 47-63Hz, with specific input overvoltage and turn-on/shutdown voltage specifications. The PIM-series unit measures W36mm x H90mm x D91mm, has an IP20 degree of protection, and is housed in a polycarbonate (PC) material. Designed for single-phase network operation, it has a net width of 36 mm and offers a rated power of 90W at -10 to +60°C, with a linear derating to 67.2W at +70°C. The output voltage is adjustable between 24Vdc and 28Vdc, featuring protection functions against overvoltage and overload/short-circuit conditions. It showcases an efficiency of 0.938 at 230Vac input and 0.921 at 120Vac input, with specific current consumption rates under various conditions. The unit has a 50ms start-up delay, specified rise times, and hold times at different input voltages, along with power dissipation/losses and electrical durability ratings under various conditions. The ripple is noted at 100mVpp, and the output stage capacitance is 1600 µF.

PulsSTOCK: 14

This item can ship within 24h!

175716

connecting cable SIM-M12-5GD-5-PU For sensors and proximity switches. Conforms to standard: (* EN 61076-2-101, * EN 61984), Electrical connection: (* 5-pin/5-wire, * Straight socket/open end, * M12x1 / -), Plug coding: A, Operating voltage range DC: 0 - 6

FestoSTOCK: 18

This item can ship within 24h!

541338

connecting cable NEBU-M8W3-K-2.5-LE3 for proximity sensors, position transmitter, pressure switch, flow sensors, visual and inductive sensors. Conforms to standard: (* Core colours and connection numbers to EN 60947-5-2, * EN 61076-2-104), Cable identific

FestoSTOCK: 71

This item can ship within 24h!

I55AE137B1AV11003S

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

LenzeSTOCK: 60

This item can ship within 24h!

541333

connecting cable NEBU-M8G3-K-2.5-LE3 for proximity sensors, position transmitter, pressure switch, flow sensors, visual and inductive sensors. Conforms to standard: (* Core colours and connection numbers to EN 60947-5-2, * EN 61076-2-104), Cable identific

FestoSTOCK: 3

This item can ship within 24h!

BI5-M18E-AN6X-H1141

Turck BI5-M18E-AN6X-H1141 is an inductive proximity sensor belonging to the BI...-M18 series. This sensor features an extended barrel embeddable design with a chrome-plated brass housing and is pre-equipped with a 4-pin M12 Eurofast QD male connector. It operates on a supply voltage of 10-30Vdc, with nominal voltages of 12Vdc and 24Vdc. The sensor has a shape of an M18 partially threaded extended cylindrical/barrel and offers a degree of protection rated at IP67. It can operate at a maximum switching frequency of 1kHz / 1000Hz and has an ambient air temperature range for operation between -25°C and +70°C. The response time of the sensor is 8ms / 0.008 s, and it includes 1 x digital output (10-30Vdc; NPN; 200mA max.). The sensing distance is 5mm, and it features protection functions against short-circuit (pulsed), overload, and reverse polarity. The control circuit rated current is 200mA / 0.2 A, with a thread size of M18, and operates in a NO (Normally Open) mode.

TurckSTOCK: 64

This item can ship within 24h!

CP10.241-S2

PULS CP10.241-S2 is a DIN rail mounting power supply unit with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C and has a net width of 39 mm. The current consumption varies with input voltage, being 1.13A at 230Vac input, 2.15A at 120Vac input, 2.6A at 100Vac input, and 2.35A at 110Vdc input, with a peak inrush current of 11A at 230Vac input and 7A at 120Vac input. It offers an IP20 degree of protection and achieves an efficiency of 0.952 at 230Vac input and 0.936 at 120Vac input. The dimensions are W39mm x H124mm x D117mm. The start-up delay ranges from 240-300ms for 100-230Vac input, with a rise time of 30ms under nominal input and full constant current load without load capacitance, and 160ms with 10mF load capacitance. It features protection against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart in case of over-temperature conditions. The unit supports series/parallel operation for increased output voltages or power, and 1+1 redundancy with a redundancy module. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W at 230Vac input and 16.4W at 120Vac input, with an output stage capacitance of 4400µF. Electrical durability varies with conditions, reaching up to 499,000 hours at 40°C and 12A output with 1AC 230Vac input. The ripple is 50mVpp (20Hz...20MHz; 50Ω). This AC/DC power supply unit offers a 20% power reserve and includes ATEX approval, DC-OK relay contact output, and push-in spring connections. The supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. The rated current is 12A at 48Vdc from -25 to +45°C, 10A at 24Vdc from +45 to +60°C, and 7.5A at 24Vdc at +70°C. It is suitable for single-phase (1AC) or DC networks, with a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with linear derating between +60°C and +70°C. The output voltage is adjustable from 24Vdc to 28Vdc, with a 200mV turn-ON overshoot, and a hold time of 37ms at 120/230Vac input.

PulsSTOCK: 4

This item can ship within 24h!

193457

plug socket with cable KMEB-1-24-10-LED pre-assembled, for VUVB, MEBH, MOEBH valves and N2 solenoids. Switching position indicator: LED, Mounting type: On solenoid valve with M2.5 central screw, Assembly position: Any, Product weight: 460 g, Electrical co

FestoSTOCK: 2

This item can ship within 24h!

PIM60.241

PULS PIM60.241 is a power supply unit that functions as an AC/DC PSU/converter with DIN rail mounting. It operates within an ambient air temperature range of -10 to +60°C, with linear derating up to +70°C. The unit features a DC-OK relay contact output and provides a rated current of 3.8A at 24Vdc within -10 to +60°C and 2.8A at 24Vdc at +70°C. It is equipped with push-in spring connections for connectivity and supports a supply voltage range of 90Vac-264Vac across various nominal voltages from 100Vac to 240Vac at 47-63Hz, with specific input overvoltage and turn-on/shutdown voltage specifications. The PIM-series unit measures W36mm x H90mm x D91mm, has an IP20 degree of protection, and is housed in a polycarbonate (PC) material. Designed for single-phase network operation, it has a net width of 36 mm and offers a rated power of 90W at -10 to +60°C, with a linear derating to 67.2W at +70°C. The output voltage is adjustable between 24Vdc and 28Vdc, featuring protection functions against overvoltage and overload/short-circuit conditions. It showcases an efficiency of 0.938 at 230Vac input and 0.921 at 120Vac input, with specific current consumption rates under various conditions. The unit has a 50ms start-up delay, specified rise times, and hold times at different input voltages, along with power dissipation/losses and electrical durability ratings under various conditions. The ripple is noted at 100mVpp, and the output stage capacitance is 1600 µF.

PulsSTOCK: 14

This item can ship within 24h!

175716

connecting cable SIM-M12-5GD-5-PU For sensors and proximity switches. Conforms to standard: (* EN 61076-2-101, * EN 61984), Electrical connection: (* 5-pin/5-wire, * Straight socket/open end, * M12x1 / -), Plug coding: A, Operating voltage range DC: 0 - 6

FestoSTOCK: 18

This item can ship within 24h!

541338

connecting cable NEBU-M8W3-K-2.5-LE3 for proximity sensors, position transmitter, pressure switch, flow sensors, visual and inductive sensors. Conforms to standard: (* Core colours and connection numbers to EN 60947-5-2, * EN 61076-2-104), Cable identific

FestoSTOCK: 71

This item can ship within 24h!

I55AE137B1AV11003S

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

LenzeSTOCK: 60

This item can ship within 24h!

541333

connecting cable NEBU-M8G3-K-2.5-LE3 for proximity sensors, position transmitter, pressure switch, flow sensors, visual and inductive sensors. Conforms to standard: (* Core colours and connection numbers to EN 60947-5-2, * EN 61076-2-104), Cable identific

FestoSTOCK: 3

This item can ship within 24h!

BI5-M18E-AN6X-H1141

Turck BI5-M18E-AN6X-H1141 is an inductive proximity sensor belonging to the BI...-M18 series. This sensor features an extended barrel embeddable design with a chrome-plated brass housing and is pre-equipped with a 4-pin M12 Eurofast QD male connector. It operates on a supply voltage of 10-30Vdc, with nominal voltages of 12Vdc and 24Vdc. The sensor has a shape of an M18 partially threaded extended cylindrical/barrel and offers a degree of protection rated at IP67. It can operate at a maximum switching frequency of 1kHz / 1000Hz and has an ambient air temperature range for operation between -25°C and +70°C. The response time of the sensor is 8ms / 0.008 s, and it includes 1 x digital output (10-30Vdc; NPN; 200mA max.). The sensing distance is 5mm, and it features protection functions against short-circuit (pulsed), overload, and reverse polarity. The control circuit rated current is 200mA / 0.2 A, with a thread size of M18, and operates in a NO (Normally Open) mode.

TurckSTOCK: 64

This item can ship within 24h!

CP10.241-S2

PULS CP10.241-S2 is a DIN rail mounting power supply unit with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C and has a net width of 39 mm. The current consumption varies with input voltage, being 1.13A at 230Vac input, 2.15A at 120Vac input, 2.6A at 100Vac input, and 2.35A at 110Vdc input, with a peak inrush current of 11A at 230Vac input and 7A at 120Vac input. It offers an IP20 degree of protection and achieves an efficiency of 0.952 at 230Vac input and 0.936 at 120Vac input. The dimensions are W39mm x H124mm x D117mm. The start-up delay ranges from 240-300ms for 100-230Vac input, with a rise time of 30ms under nominal input and full constant current load without load capacitance, and 160ms with 10mF load capacitance. It features protection against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart in case of over-temperature conditions. The unit supports series/parallel operation for increased output voltages or power, and 1+1 redundancy with a redundancy module. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W at 230Vac input and 16.4W at 120Vac input, with an output stage capacitance of 4400µF. Electrical durability varies with conditions, reaching up to 499,000 hours at 40°C and 12A output with 1AC 230Vac input. The ripple is 50mVpp (20Hz...20MHz; 50Ω). This AC/DC power supply unit offers a 20% power reserve and includes ATEX approval, DC-OK relay contact output, and push-in spring connections. The supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. The rated current is 12A at 48Vdc from -25 to +45°C, 10A at 24Vdc from +45 to +60°C, and 7.5A at 24Vdc at +70°C. It is suitable for single-phase (1AC) or DC networks, with a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with linear derating between +60°C and +70°C. The output voltage is adjustable from 24Vdc to 28Vdc, with a 200mV turn-ON overshoot, and a hold time of 37ms at 120/230Vac input.

PulsSTOCK: 4

BIM-IKE-AP6X-H1141 W/KLI3

Product details

This part can ship within 24 hours

$110.80

$110.80

Relevant products

I55AE137B1AV11003S

541333

BI5-M18E-AN6X-H1141

CP10.241-S2

193457

PIM60.241

175716

541338

I55AE137B1AV11003S

541333

BI5-M18E-AN6X-H1141

CP10.241-S2

193457

PIM60.241

175716

541338

I55AE137B1AV11003S

541333

BI5-M18E-AN6X-H1141

CP10.241-S2

What can I help you find today?