Powermatic Associates Logo

STBART0200K Schneider Electric Industrial Automation Components

STBART0200K on Powermatic Associates
Schneider Electric

Part#:STBART0200K

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric STBART0200K is an I/O unit categorized under the Modicon STB I/O modules sub-range, designed as a standard module. It functions as an analog input kit with a connection type of 2 x 6-pin screw or spring terminal block. The unit requires a supply voltage of 19-30Vdc, with 24Vdc nominal, and is designed for DIN rail mounting when used with a mounting base. It operates within an ambient air temperature range of +32...+158°F / 0...+70 °C and has a degree of protection rated at IP20. The current consumption is 30mA at 5Vdc via bus, and it includes protection functions such as reverse polarity protection by a time-lag fuse on the Power Distribution Module (PDM) and cut sensor wire detection. The STBART0200K supports 2 x analog inputs for thermocouple types B, J, E, K, T, R, S or RTD types Cu, Pt100, Pt1000, Ni100, Ni1000. It can operate in up to 95% humidity at 140°F (60°C) without condensation.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of STBART0200K on Powermatic Associates is $419.00. Order now.

Similar products from: Schneider Electric Industrial Automation Components

NSYTBP16128T on Powermatic Associates

NSYTBP16128T

Schneider Electric

Schneider Electric - NSYTBP16128T

25 in stock
M9F53350 on Powermatic Associates

M9F53350

Schneider Electric

Schneider Electric M9F53350 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 3 Pole configuration and a rated current of 50A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. This MCB offers a short circuit breaking rating of 10kA AIR at 120Vac, 240Vac, and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and ensures all three poles are protected. The tripping curve for this device is classified as D.

1 in stock
XB7EV05MP on Powermatic Associates

XB7EV05MP

Schneider Electric

Schneider Electric XB7EV05MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, indicating a high level of protection against dust, water, and other environmental factors. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It is designed with screw-clamp type terminals for secure connections. The light emitted by the LED is yellow. The physical dimensions of the XB7EV05MP include a diameter of 22 mm, a net height of 29 mm, a net depth of 54 mm, and a net width of 29 mm.

6 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

94 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
DFCC2 on Powermatic Associates

DFCC2

Schneider Electric

Schneider Electric - DFCC2

14 in stock

Manufacturer warranty

STBART0200K Schneider Electric

$419.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$419.00

$419.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

STBAHI8321KC on Powermatic Associates

STBAHI8321KC

Verified stock: 0

Schneider Electric STBAHI8321KC is a communications unit specifically designed for HART multiplexer communication. It falls under the Modicon STB communication modules sub-range and features a signal filtering function for analog pass-through, including 1 passive filter of 25Hz with a 3dB attenuation point. This unit utilizes a 1 x 18-pin spring type connector for connections and operates on a supply voltage of 19-30Vdc, with 24Vdc nominal, which must be externally supplied. It is designed to function within an ambient air temperature range of +32...+140°F / 0...+60 °C and offers a degree of protection rated at IP20. The STBAHI8321KC supports the HART communication protocol and has a current consumption of 400mA at 5Vdc via the logic bus. It can accommodate up to 4 x HART channels for connection capacity. For storage, it can withstand ambient air temperatures ranging from -40...+185°F / -40...+85 °C and can operate in up to 95% humidity without condensation.

Schneider Electric

STBAVI1400K on Powermatic Associates

STBAVI1400K

Verified stock: 0

Schneider Electric STBAVI1400K is an I/O unit categorized under the Modicon STB I/O modules sub-range, designed as a standard module. This analog input kit facilitates connection through 2 x 6-pin screw or spring terminal blocks and operates on a supply voltage of 19-30Vdc, with 24Vdc nominal. It is designed for DIN rail mounting when used with a mounting base and can operate in ambient air temperatures ranging from -13 to +158°F (-25 to +70°C). The unit has an IP20 degree of protection and consumes 90mA of current at 5Vdc via bus. It features reverse polarity and electronic protection for the sensor power supply, along with cut sensor wire detection. The STBAVI1400K supports 8 x analog inputs, ranging from -10 to +10Vdc with 15-bit plus sign resolution, and can withstand up to 95% humidity at 140°F (60°C) without condensation.

Schneider Electric

FAQ

What is the price of STBART0200K?
Purchase the STBART0200K from Powermatic Associates at the price of $419.00. Order today.

Out if stock but available for backorder.

Schneider Electric STBART0200K is an I/O unit categorized under the Modicon STB I/O modules sub-range, designed as a standard module. It functions as an analog input kit with a connection type of 2 x 6-pin screw or spring terminal block. The unit requires a supply voltage of 19-30Vdc, with 24Vdc nominal, and is designed for DIN rail mounting when used with a mounting base. It operates within an ambient air temperature range of +32...+158°F / 0...+70 °C and has a degree of protection rated at IP20. The current consumption is 30mA at 5Vdc via bus, and it includes protection functions such as reverse polarity protection by a time-lag fuse on the Power Distribution Module (PDM) and cut sensor wire detection. The STBART0200K supports 2 x analog inputs for thermocouple types B, J, E, K, T, R, S or RTD types Cu, Pt100, Pt1000, Ni100, Ni1000. It can operate in up to 95% humidity at 140°F (60°C) without condensation.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock