SM312DQD

MINI-BEAM: Diffuse; Range: 380 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; 4-pin M12 Integral QD

Banner

4

IM-T-9A

Relay Module for Safety Light Curtain/Control with EDM; Supply Voltage: 24 V dc; Safety Input: 1 Dual/Single Channel; Safety Output: 3 NO, 6 A; Aux Output: None; Terminal Block: Removable; Width: 22.5 mm

Banner

1

LMBWLB32

WLB32 Mounting Clip Replacement Kit; Contains 4 Brackets and Screws; Includes Two Insulators For Use on End of AC Units

Banner

3

I55AE137B1AV11003S

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

Lenze

10

42509

Icotek 42509 - QT 9 grey

Icotek

3

SMB18A

Bracket: 18 mm Right-Angle-mount; Material: 11 Gauge Stainless Steel; Curved mounting slot for versatility/orientation; Clearance for M4 #8 hardware

Banner

8

XS2RO

Safety Controller Expansion Module: Dual Relay Output Module; Safety Outputs: 4 NO, 6 A; Aux Outputs: 2 NC, 2.5 A; Used with XS26-2 Safety Controllers

Banner

4

XS26-2DE

XS26-2DE Safety Controller: Expandable; 26 Input; 2 pairs of PNP Safety Outputs (0.5 A each); Display; Ethernet; USB; 8 Convertible Inputs; Removable Screw Terminals; 24 V dc; 160 mA

Banner

1

SM312DQD

MINI-BEAM: Diffuse; Range: 380 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; 4-pin M12 Integral QD

Banner

4

IM-T-9A

Relay Module for Safety Light Curtain/Control with EDM; Supply Voltage: 24 V dc; Safety Input: 1 Dual/Single Channel; Safety Output: 3 NO, 6 A; Aux Output: None; Terminal Block: Removable; Width: 22.5 mm

Banner

1

LMBWLB32

WLB32 Mounting Clip Replacement Kit; Contains 4 Brackets and Screws; Includes Two Insulators For Use on End of AC Units

Banner

3

I55AE137B1AV11003S

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

Lenze

10

42509

Icotek 42509 - QT 9 grey

Icotek

3

SMB18A

Bracket: 18 mm Right-Angle-mount; Material: 11 Gauge Stainless Steel; Curved mounting slot for versatility/orientation; Clearance for M4 #8 hardware

Banner

8

XS2RO

Safety Controller Expansion Module: Dual Relay Output Module; Safety Outputs: 4 NO, 6 A; Aux Outputs: 2 NC, 2.5 A; Used with XS26-2 Safety Controllers

Banner

4

XS26-2DE

XS26-2DE Safety Controller: Expandable; 26 Input; 2 pairs of PNP Safety Outputs (0.5 A each); Display; Ethernet; USB; 8 Convertible Inputs; Removable Screw Terminals; 24 V dc; 160 mA

Banner

1

SM312DQD

MINI-BEAM: Diffuse; Range: 380 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; 4-pin M12 Integral QD

Banner

4

IM-T-9A

Relay Module for Safety Light Curtain/Control with EDM; Supply Voltage: 24 V dc; Safety Input: 1 Dual/Single Channel; Safety Output: 3 NO, 6 A; Aux Output: None; Terminal Block: Removable; Width: 22.5 mm

Banner

1

LMBWLB32

WLB32 Mounting Clip Replacement Kit; Contains 4 Brackets and Screws; Includes Two Insulators For Use on End of AC Units

Banner

3

I55AE137B1AV11003S

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

Lenze

10

SSP1A4125BD Schneider Electric Control Relays

Part#:SSP1A4125BD

Manufacturer:Schneider Electric

Category:Control Relays

Product condition

SSP1A4125BD Description

Recommended parts

SM312DQD

IM-T-9A

LMBWLB32

I55AE137B1AV11003S

42509

SMB18A

XS2RO

XS26-2DE

SM312DQD

IM-T-9A

LMBWLB32

I55AE137B1AV11003S

42509

SMB18A

XS2RO

XS26-2DE

SM312DQD

IM-T-9A

LMBWLB32

I55AE137B1AV11003S