Powermatic Associates Logo

QO220EPD2100 Schneider Electric Industrial Automation Components

QO220EPD2100 on Powermatic Associates
Schneider Electric

Part#:QO220EPD2100

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Square D by Schneider Electric QO220EPD2100 is a Miniature Circuit Breaker (MCB) designed for equipment protection with integrated ground fault protection and an alarm/fault trip signalling switch. This 2-pole MCB features a plug-in mounting mode and a plug-in connection type, facilitating easy installation. It is rated for a current of 20A and supports a voltage range of 120V to 240V AC. The QO220EPD2100 can accommodate a wire size of 14-8AWG (1 cable Cu), ensuring compatibility with a variety of installations. It has a residual current sensitivity of 30mA/0.03, providing precise ground fault detection. The breaker offers a short circuit breaking rating of 10kA at 240Vac and utilizes press plate terminals for secure wire connections.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

MG17466 on Powermatic Associates

MG17466

Schneider Electric

Schneider Electric MG17466 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 3-pole device is rated for a current of 15A and operates at a rated voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac and 5kA AIR at 480Y/277Vac. All three poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D326BL on Powermatic Associates

LC1D326BL

Schneider Electric

Schneider Electric LC1D326BL is a magnetic contactor from the Deca sub-range, featuring a low-consumption coil that consumes less than 2.4W. It is designed with ring-lugs connections and has three poles (3P; 3NO) with a rated current of 50A for AC-1 and 32A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated active power ranging from 7.5kW at 220-230Vac to 18.5kW at 660-690Vac in AC-3. It also features 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower varies from 2HP at 115Vac in single-phase to 25HP at 575-600Vac in three-phase, according to UL/CSA standards. Its mechanical durability is rated at 15 million operations at no load, and its electrical durability is rated at 1.6 million operations with load. The rated voltage (AC) phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

4 in stock
HDF36070 on Powermatic Associates

HDF36070

Schneider Electric

Square D by Schneider Electric HDF36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, designed as a PowerPact H-Frame 150 TMD 3P 70A 600Vac/250Vdc with a 14kA busbar rated at 80%. It features a Term. nut kit for fixed busbar connection on both line and load sides, with three poles (3P). This MCCB offers thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 70A, a rated insulation voltage (Ui) of 750 V, and operates at rated voltages of 600Vac 600Y/347Vac and 250Vdc. The unit is designed for individual mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It provides an IP40 degree of protection and operates via a toggle (manual) mode. Protection settings include over-current fixed at 70A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 70 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

1 in stock
RPZF1 on Powermatic Associates

RPZF1

Schneider Electric

Schneider Electric RPZF1 is a plug-in socket designed for use within the RPM sub-range. This socket is rated for a current of 16 A and can be mounted on a DIN rail. It operates within an ambient air temperature range of -40 to +55 ��C and offers a degree of protection rated at IP20. The RPZF1 is designed for a rated voltage (AC) of 600 V and incorporates protection functions including Long-time (L) and Instantaneous (I) protection. It features a trip current rating of 2000 AT, a frame current rating of 3000 AF, and a short circuit breaking rating of 125kA at 240Vac, 100kA at both 480Y/277Vac and 480Vac, and 50kA at both 600Y/347Vac and 600Vac. This socket supports 3 poles and utilizes a Micrologic 3.0 (LI) Electronic trip unit type.

20 in stock
9080LB51 on Powermatic Associates

9080LB51

Schneider Electric

Schneider Electric - 9080LB51

4 in stock
ZB5AA2 on Powermatic Associates

ZB5AA2

Schneider Electric

Schneider Electric ZB5AA2 is a flush head component of the XB5 sub-range, featuring a plastic body and bezel. This round-shaped part has a diameter of 22 mm and operates on a spring-return (impulse/momentary) mechanism.

3 in stock

Manufacturer warranty

QO220EPD2100 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

Square D by Schneider Electric QO220EPD2100 is a Miniature Circuit Breaker (MCB) designed for equipment protection with integrated ground fault protection and an alarm/fault trip signalling switch. This 2-pole MCB features a plug-in mounting mode and a plug-in connection type, facilitating easy installation. It is rated for a current of 20A and supports a voltage range of 120V to 240V AC. The QO220EPD2100 can accommodate a wire size of 14-8AWG (1 cable Cu), ensuring compatibility with a variety of installations. It has a residual current sensitivity of 30mA/0.03, providing precise ground fault detection. The breaker offers a short circuit breaking rating of 10kA at 240Vac and utilizes press plate terminals for secure wire connections.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock