BMH2053P06F2A Schneider Electric Servo Motors

Out if stock but available for backorder.

Schneider Electric BMH2053P06F2A is an AC servo motor within the Servo motors sub-range, featuring an absolute single-turn 16ppr SinCos encoder, a smooth shaft with a holding brake, and triple (3) motor stacks designed for optimized torque and speed of rotation with medium inertia. It operates on a supply voltage range of 115Vac-480Vac, including specific ratings at 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. The connection is facilitated by a rotatable right-angled connector, and it boasts a degree of protection rated at IP54. The rated current varies with speed and voltage, being 30.8A at 500rpm and 115Vac, 26.4A at 1000rpm and 230Vac, and 17.9A at 2000rpm for both 400Vac and 480Vac. Mounting is achieved via a 205x205mm flange, and it uses the HIPERFACE communication protocol. The motor's dimensions are 259 mm in height, 538.5 mm in depth, and 205 mm in width, designed to operate in ambient air temperatures ranging from -20 to +40°C. Its rotational speed capabilities are 500rpm at 115Vac, 1000rpm at 230Vac, and 2000rpm at both 400Vac and 480Vac, with a rated active power of 4.2kW at 500rpm and 115Vac, 7.38kW at 1000rpm and 230Vac, and 9.4kW at 2000rpm for both 400Vac and 480Vac. The maximum torque is 330Nm, with a stall torque of 88Nm, and operational torques of 80.2Nm at 500rpm and 115Vac, 70.4Nm at 1000rpm and 230Vac, and 45Nm at 2000rpm for both 400Vac and 480Vac. The moment of inertia is rated at 206kg.cm2.