Powermatic Associates Logo

BCH2LD0230CA5C Schneider Electric Industrial Automation Components

BCH2LD0230CA5C on Powermatic Associates
Schneider Electric

Part#:BCH2LD0230CA5C

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric BCH2LD0230CA5C is an AC servo motor within the Servo motors sub-range, featuring an AC brushless servo motor design with an absolute single-turn 20-bit encoder and a smooth shaft. It is optimized for low-inertia operations and has a speed of rotation of 3000rpm. This motor operates on a supply voltage of 220Vac and offers a free leads connection type. It is designed with a 60x60mm flange mounting mode and provides a degree of protection rated at IP54 and IP65. The rated current is 1.3A, with dimensions of 78.5 mm in height, 104 mm in depth, and 60 mm in width. The rated active power is 0.2kW or 200W, equivalent to 0.26HP, with a maximum torque of 1.92Nm, a stall torque of 0.64Nm, and a nominal torque of 0.64Nm. The moment of inertia is 0.16kg.cm2.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
M9XCTC15 on Powermatic Associates

M9XCTC15

Schneider Electric

Schneider Electric M9XCTC15 is a cover designed specifically for use with M9XC comb busbars. It belongs to the Comb busbars sub-range and serves as a Multi 9 - tooth cover. This product comes as a set of 5, tailored to enhance the application and integration of M9XC comb busbars within electrical installations.

10 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock

Manufacturer warranty

BCH2LD0230CA5C Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI1FRD23A7-N on Powermatic Associates

MDI1FRD23A7-N

Novanta IMS

Novanta IMS MDI1FRD23A7-N is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase DC stepper motor design. It includes a rear control knob and a single motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage requirement ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with a 57x57mm flange. The operational ambient air temperature range is from 0 to +85°C. It has an IP20 degree of protection, a moment of inertia of 0.18kg.cm^2, a stall torque of 64N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

BCH2MM0913CF6C on Powermatic Associates

BCH2MM0913CF6C

Verified stock: 0

Schneider Electric BCH2MM0913CF6C is an AC servo motor within the Servo motors sub-range, featuring an AC brushless servo motor design with an absolute single-turn 20-bit encoder, a keyed shaft, and a holding brake. It is optimized for torque and medium inertia. This motor operates at a supply voltage of 220Vac and connects via a MIL connector. It is designed with a degree of protection rated at IP65 and has a rated current of 6.15A. The motor is mounted using a 130x130mm flange and has dimensions of 175.6 mm in height, 198 mm in depth, and 130 mm in width. It offers rotational speeds of 1000/1500rpm, a rated active power of 0.9kW (900W), and delivers a maximum torque of 25.77Nm, with a stall torque and nominal torque of 8.59Nm. The moment of inertia is specified as 10kg.cm^2.

Schneider Electric

BCH2MM0811CA6C on Powermatic Associates

BCH2MM0811CA6C

Verified stock: 0

Schneider Electric BCH2MM0811CA6C is an AC servo motor within the Servo motors sub-range, featuring an AC brushless servo motor design with an absolute single-turn 20-bit encoder and a keyed shaft optimized for torque in medium-inertia applications. It operates on a 220Vac supply voltage and utilizes a MIL connector for its connection type. This motor is designed with a 130x130mm flange mounting mode and offers a degree of protection rated at IP54 and IP65. It has a rated current of 6.29A, with dimensions of 175.6 mm in height, 187 mm in depth, and 130 mm in width. The BCH2MM0811CA6C achieves rotational speeds of 1000/1500rpm, has a rated active power of 8.5kW / 850W, and delivers a maximum torque of 13.8Nm. Its rated power is 1.13HP, with both stall torque and nominal torque at 5.39Nm, and a moment of inertia of 13.5kg.cm2.

Schneider Electric

BCH2MM0613CF6C on Powermatic Associates

BCH2MM0613CF6C

Verified stock: 0

Schneider Electric BCH2MM0613CF6C is an AC servo motor within the Servo motors sub-range, featuring an AC brushless servo motor design with an absolute single-turn 20-bit encoder, a keyed shaft, and a holding brake. It is optimized for torque in medium-inertia applications. This motor operates at a supply voltage of 220Vac and connects via a MIL connector. It offers a degree of protection rated at IP65 and has a rated current of 4.1A. The motor is designed for mounting with a 130x130mm flange and has dimensions of 175.6 mm in height, 183 mm in depth, and 130 mm in width. It operates at rotational speeds of 1000/1500rpm, with a rated active power of 0.6kW (600W) and a rated power of 0.8HP. The maximum torque is 17.19Nm, with a stall torque and nominal torque of 5.73Nm, and a moment of inertia of 6.91kg.cm^2.

Schneider Electric

BCH2MR3020CF6C on Powermatic Associates

BCH2MR3020CF6C

Verified stock: 0

Schneider Electric BCH2MR3020CF6C is an AC servo motor within the Servo motors sub-range, featuring an AC brushless servo motor design. It includes an absolute single-turn 20-bit encoder, a smooth shaft, and a holding brake, with torque and speed of rotation optimized for medium-inertia applications. This motor operates on a supply voltage of 220Vac and connects via a MIL connector. It offers a degree of protection rated at IP54 and IP65, ensuring suitability for various environments. The rated current is 18.8A, and it is designed to be mounted with a 180x180mm flange. The dimensions are 245.1 mm in height, 235 mm in depth, and 180 mm in width. It achieves a rotational speed of 2000rpm, with a rated active power of 3kW (3000W) or 4.02HP. The maximum torque is 42.97Nm, with a stall torque and nominal torque of 14.32Nm, and a moment of inertia of 54.1kg.cm^2.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric BCH2LD0230CA5C is an AC servo motor within the Servo motors sub-range, featuring an AC brushless servo motor design with an absolute single-turn 20-bit encoder and a smooth shaft. It is optimized for low-inertia operations and has a speed of rotation of 3000rpm. This motor operates on a supply voltage of 220Vac and offers a free leads connection type. It is designed with a 60x60mm flange mounting mode and provides a degree of protection rated at IP54 and IP65. The rated current is 1.3A, with dimensions of 78.5 mm in height, 104 mm in depth, and 60 mm in width. The rated active power is 0.2kW or 200W, equivalent to 0.26HP, with a maximum torque of 1.92Nm, a stall torque of 0.64Nm, and a nominal torque of 0.64Nm. The moment of inertia is 0.16kg.cm2.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts