ATV71HU30M3383 Schneider Electric Variable Frequency Drives (VFD)

Out if stock but available for backorder.

Schneider Electric ATV71HU30M3383 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 71 series. It features variable speed/frequency drive functionality with U/F ratio adjustment (2 points / 5 points), sensorless flux vector control, ENA System, and vector control with or without speed feedback. It can deliver 220% of the nominal motor torque for 2 seconds and 170% of the nominal motor torque for 60 seconds. The design includes a built-in EMC filter, synchronous motor control, and a built-in heatsink. It operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nominal) and has dimensions of H260mm x W155mm x D187mm. The degree of protection is IP20 UL type 1. The rated current is 13.7A (230Vac; 4kHz; 3-phase), 11A (230Vac; 4kHz; single-phase), with maximum currents of 18.1A (single-phase; for 2s), 22.6A (3-phase; for 2s), 16.5A (single-phase; for 60s), and 20.6A (3-phase; for 60s). It supports wall mounting and uses Modbus and CANopen communication protocols. It is compatible with both single-phase (1P) and 3-phase (3P) networks, with an output network frequency of 0.1-599 Hz. The device includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable (LI1-LI5), 1 digital input programmable as discrete or PTC input (LI6; 24Vdc; sink/source), 1 PWR safety input (24Vdc), 1 digital output (C/O SPDT relay contact) (R1), and 2 digital outputs (NO relay contacts) (R2). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is 25.9A (200Vac; 2.2kW; single-phase), 19.3A (200Vac; 3kW; 3-phase), 22.1A (240Vac; 2.2kW; single-phase), and 16.4A (240Vac; 3kW; 3-phase). The rated active power is 3kW (3-phase) and 2.2kW (single-phase), with a rated power of 3HP (single-phase).