8102899 Festo Quarter Turn Actuators

8102899 on Powermatic Associates
Festo

Part#:8102899

Manufacturer:Festo

Alt. Part#:DFPD-1200-RP-90-RS60-F14-R3-C

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DFPD-1200-RP-90-RS60-F14-R3-C Size of actuator: 1200, Flange hole pattern: F14, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8102899 Festo price in the box on the right side or send a quick quote.

Product Details

  • ATEX category gas
    II 2G
  • Safety function
    The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
  • Swivel angle
    90 deg
  • Mounting position
    Any
  • Closing direction
    Clockwise closing
  • Safety integrity level (SIL)
    Up to SIL 2 low demand mode up to SIL 1 high demand mode
  • Operating pressure
    2 bar ... 8 bar
  • PFH
    1.01E-7
  • Depth shaft connection
    38 mm
  • Mode of operation
    Single-acting
  • Connection for valve positioner and position sensor conforms to standard
    VDI/VDE 3845 size AA 3
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Type of (ignition) protection for dust
    Ex h IIIC T105°C Db X
  • Nominal operating pressure
    6 bar
  • MTTFd
    1126 years
  • Maritime classification
    See certificate
  • Standard connection for valve
    ISO 5211
  • Size of valve actuator
    1200
  • Devices type according to VDMA 66413
    Safety device
  • End-position adjusting range at 0°
    -5 deg ... 5 deg
  • Design
    Gear rack/pinion
  • Valve connection conforms to standard
    VDI/VDE 3845 (NAMUR)
  • Certified for safety function to ISO 13849 and IEC 61508 (SIL)
    Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
  • Type of ignition protection for gas
    Ex h IIC T4 Gb X
  • Ambient temperature
    -20 °C ... 80 °C
  • Information on operating and pilot media
    Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Spring return torque at 0° swivel angle
    325.1 Nm
  • PFD
    7.8E-4
  • Product weight
    43062 g
  • Cover material
    Die-cast aluminum, coated
  • Housing material
    Wrought aluminum alloy, anodized
  • Cam material
    Steel
  • Material of screws
    High-alloy stainless steel
  • Flange hole pattern
    F14
  • End-position adjusting range at nominal swivel angle
    -5 deg ... 5 deg
  • Type code
    DFPD
  • Symbol
    00991266
  • ATEX category for dust
    II 2D
  • Explosive ambient temperature
    -20°C <= Ta <= +80°C
  • Certificate issuing authority
    DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
  • CE marking (see declaration of conformity)
    as per EU explosion protection directive (ATEX)
  • Spring return torque with 90° swivel angle
    595 Nm
  • Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
    43.5 l
  • Material of sub-base
    Wrought aluminum alloy, anodized
  • Note on materials
    RoHS-compliant
  • Material of bearing
    POM
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Storage temperature
    -20 °C ... 60 °C
  • Torque at nominal operating pressure and 90° swivel angle
    477.2 Nm
  • Shaft connection
    T36
  • Material of spring
    Spring steel
  • Shaft material
    High-alloy stainless steel
  • Torque at nominal operating pressure and 0° swivel angle
    796.3 Nm
  • Note about the torque
    The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
  • Pneumatic connection
    G1/4
  • Seals material
    NBR
  • Material of piston
    Die-cast aluminum

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.



Related documents 8102899 Specs

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts