8102846 Festo Quarter Turn Actuators

Name: 8102846
Brand: Festo

Part#:8102846

Manufacturer:Festo

Alt. Part#:DFPD-N-240-RP-90-RS45-F10-R3-C

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DFPD-N-240-RP-90-RS45-F10-R3-C Size of actuator: 240, Flange hole pattern: F10, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8102846 Festo price in the box on the right side or send a quick quote.

Product Details

Operating pressure
2 bar ... 8 bar
MTTFd
1126 years
Nominal operating pressure
4.5 bar
PFH
1.01E-7
Flange hole pattern
F10
Swivel angle
90 deg
Mounting position
Any
Symbol
00991266
ATEX category gas
II 2G
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Maritime classification
See certificate
End-position adjusting range at nominal swivel angle
-5 deg ... 5 deg
Depth shaft connection
24 mm
Design
Gear rack/pinion
Size of valve actuator
240
Closing direction
Clockwise closing
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
ATEX category for dust
II 2D
Information on operating and pilot media
Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
Storage temperature
-20 °C ... 60 °C

Product weight

9756 g

Cover material

Die-cast aluminum, coated

Material of spring

Spring steel

Devices type according to VDMA 66413

Safety device

Safety function

The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.

Type code

DFPD

Mode of operation

Single-acting

Connection for valve positioner and position sensor conforms to standard

VDI/VDE 3845 size AA 2

Type of (ignition) protection for dust

Ex h IIIC T105°C Db X

Ambient temperature

-20 °C ... 80 °C

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Spring return torque with 90° swivel angle

124.6 Nm

Pneumatic connection

1/4 NPT

Seals material

NBR

Material of bearing

POM

Shaft material

High-alloy stainless steel

End-position adjusting range at 0°

-5 deg ... 5 deg

Standard connection for valve

ISO 5211

Valve connection conforms to standard

VDI/VDE 3845 (NAMUR)

Safety integrity level (SIL)

Up to SIL 2 low demand mode up to SIL 1 high demand mode

Explosive ambient temperature

-20°C <= Ta <= +80°C

Explosion prevention and protection

Zone 1 (ATEX) Zone 22 (ATEX)

Torque at nominal operating pressure and 90° swivel angle

67.1 Nm

PFD

7.8E-4

Note on materials

RoHS-compliant

Material of piston

Die-cast aluminum

Type of ignition protection for gas

Ex h IIC T4 Gb X

Certificate issuing authority

DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19

CE marking (see declaration of conformity)

as per EU explosion protection directive (ATEX)

Spring return torque at 0° swivel angle

63 Nm

Shaft connection

T22

Housing material

Wrought aluminum alloy, anodized

Cam material

Steel

Torque at nominal operating pressure and 0° swivel angle

128.7 Nm

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°

8.6 l

Material of sub-base

Wrought aluminum alloy, anodized

Material of screws

High-alloy stainless steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric