8102813 Festo Quarter Turn Actuators

Name: 8102813
Brand: Festo

Part#:8102813

Manufacturer:Festo

Alt. Part#:DFPD-N-80-RP-90-RS45-F07-R3-C

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DFPD-N-80-RP-90-RS45-F07-R3-C Size of actuator: 80, Flange hole pattern: F07, Swivel angle: 90 deg, End-position adjustment range at 0°: -5 - 5 deg, End-position adjustment range at 90°: -5 - 5 deg

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8102813 Festo price in the box on the right side or send a quick quote.

Product Details

End-position adjusting range at 0°
-5 deg ... 5 deg
Depth shaft connection
19 mm
Mode of operation
Single-acting
Design
Gear rack/pinion
Type of (ignition) protection for dust
Ex h IIIC T105°C Db X
Explosive ambient temperature
-20°C <= Ta <= +80°C
Safety function
The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
Mounting position
Any
Connection for valve positioner and position sensor conforms to standard
VDI/VDE 3845 size AA 1
Type of ignition protection for gas
Ex h IIC T4 Gb X
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Torque at nominal operating pressure and 90° swivel angle
23.6 Nm
Spring return torque with 90° swivel angle
43.8 Nm
Pneumatic connection
1/8 NPT
Material of sub-base
Wrought aluminum alloy, anodized
Material of screws
High-alloy stainless steel
Size of valve actuator
80
Nominal operating pressure
4.5 bar
PFH
1.01E-7
Swivel angle
90 deg

Standard connection for valve

ISO 5211

Valve connection conforms to standard

VDI/VDE 3845 (NAMUR)

ATEX category for dust

II 2D

Certificate issuing authority

DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19

Information on operating and pilot media

Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Spring return torque at 0° swivel angle

22.2 Nm

Shaft connection

T17

Cover material

Die-cast aluminum, coated

Cam material

Cast stainless steel

Shaft material

High-alloy stainless steel

Operating pressure

2 bar ... 8 bar

MTTFd

1126 years

Flange hole pattern

F07

Type code

DFPD

Symbol

00991266

Certified for safety function to ISO 13849 and IEC 61508 (SIL)

Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture

Ambient temperature

-20 °C ... 80 °C

CE marking (see declaration of conformity)

as per EU explosion protection directive (ATEX)

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Product weight

3863 g

Devices type according to VDMA 66413

Safety device

Maritime classification

See certificate

End-position adjusting range at nominal swivel angle

-5 deg ... 5 deg

Closing direction

Clockwise closing

Safety integrity level (SIL)

Up to SIL 2 low demand mode up to SIL 1 high demand mode

ATEX category gas

II 2G

Explosion prevention and protection

Zone 1 (ATEX) Zone 22 (ATEX)

Storage temperature

-20 °C ... 60 °C

PFD

7.8E-4

Note on materials

RoHS-compliant

Seals material

NBR

Material of bearing

POM

Torque at nominal operating pressure and 0° swivel angle

45.2 Nm

Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°

3.1 l

Material of piston

Die-cast aluminum

Material of spring

Spring steel

Housing material

Wrought aluminum alloy, anodized

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric