8086610 Festo Electrical Peripheral Devices

Product Details

• Fieldbus interface, connection technology
  M12x1, D-coded as per EN 61076-2-101
• Note on degree of protection
  Unused connections sealed
• Intrinsic current consumption at nominal operating voltage load
  Typically 5 mA
• Information on max. cable length
  Power supply according to nominal voltage
• Power supply, type of connection
  Plug
• Diagnostics via LED
  Diagnostics per module Maintenance required
• Fieldbus interface, number of poles/wires
  4
• Max. address capacity outputs
  1324 byte
• Power failure buffering
  10 ms
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Degree of protection
  IP65 IP67
• Housing material
  PA Die-cast zinc, nickel-plated
• Permissible voltage fluctuations for electronics/sensors
  ± 25 %
• Fieldbus interface, connection type
  2x socket
• Diagnostics via bus
  Load switch-off Communication with AP module interrupted
• Communication interface, function
  System communication XF20 OUT / XF21 OUT
• Max. cable length
  50 m system communication
• Communication interface, shielding
  yes
• Power supply, number of pins/wires
  4
• Max. number of modules
  80
Corrosion resistance class (CRC)
1 - Low corrosion stress
Type of mounting
With through-hole
Dimensions W x L x H
45 mm x 170 mm x 35 mm
Max. power supply
2 x 4 A (external fuse required)
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Voltage forwarding, connection technology
M8x1, A-coded as per EN 61076-2-104
Communication interface, connection type
2x socket
Fieldbus interface, protocol
EtherNet/IP
Permissible voltage fluctuations load
± 25 %
Nominal operating voltage DC for electronics/sensors
24 V
Communication interface, number of pins/wires
4
Product weight
194 g
Diagnose per internal communication
Module error Load supply undervoltage
Fieldbus interface, type
Ethernet
Power supply, function
Incoming electronics/sensors and load
Fieldbus interface, galvanic isolation
yes
Voltage forwarding, connection type
Socket
Configuration support
EDS file
Fieldbus interface, transmission rate
100 Mbit/s
Voltage forwarding, number of pins/wires
4
Max. address capacity inputs
1324 byte
Reverse polarity protection
yes
Type code
CPX-AP-I
Ambient temperature
-20 °C ... 50 °C
Note on materials
RoHS-compliant
KC characters
KC EMC
Power supply, connection technology
M8x1, A-coded as per EN 61076-2-104
Fieldbus interface, function
Bus connection, incoming/forwarding
Relative air humidity
5 - 95 % Non-condensing
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 90 mA
Communication interface, protocol
AP-COM
Voltage forwarding, function
Outgoing electronics/sensors and load
Nominal operating voltage DC load
24 V
Note regarding operating voltage
SELV/PELV fixed power supplies required Note voltage drop
Storage temperature
-40 °C ... 70 °C
Certification
RCM compliance mark

8086610 Related Documents