8086609 Festo Electrical Peripheral Devices

8086609 on Powermatic Associates
Festo

Part#:8086609

Manufacturer:Festo

Category:Electrical Peripheral Devices

Alt. Part#:CPX-AP-I-EC-M12

Product Lifecycle:Active

Get a quick Quote!

EtherCAT® interface CPX-AP-I-EC-M12 Dimensions W x L x H: 45 mm x 170 mm x 35 mm, Diagnostics via LED: (* Diagnostics per module, * EtherCAT RUN, * Power supply electronics/sensors, * Power supply load, * System diagnostics, * Maintenance required), Diagn

About the manufacturer: Festo is one of the manufacturers that offers Electrical Peripheral Devices that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8086609 Festo price in the box on the right side or send a quick quote.

Product Details

  • Diagnose per internal communication
    Module error Load supply undervoltage
  • Communication interface, connection technology
    M8x1, D-coded as per EN 61076-2-114
  • Voltage forwarding, connection technology
    M8x1, A-coded as per EN 61076-2-104
  • Relative air humidity
    5 - 95 % Non-condensing
  • Power supply, type of connection
    Plug
  • Diagnostics via LED
    Diagnostics per module Maintenance required
  • Fieldbus interface, number of poles/wires
    4
  • Nominal operating voltage DC load
    24 V
  • Max. number of modules
    80
  • KC characters
    KC EMC
  • Fieldbus interface, type
    Ethernet
  • Power supply, function
    Incoming electronics/sensors and load
  • Information on max. cable length
    Power supply according to nominal voltage
  • Configuration support
    ESI file
  • Voltage forwarding, function
    Outgoing electronics/sensors and load
  • Communication interface, number of pins/wires
    4
  • Reverse polarity protection
    yes
  • Corrosion resistance class (CRC)
    1 - Low corrosion stress
  • Certification
    RCM compliance mark
  • Max. power supply
    2 x 4 A (external fuse required)
  • Fieldbus interface, connection type
    2x socket
  • Power supply, connection technology
    M8x1, A-coded as per EN 61076-2-104
  • Diagnostics via bus
    Load switch-off Communication with AP module interrupted
  • Voltage forwarding, connection type
    Socket
  • Max. cable length
    50 m system communication
  • Permissible voltage fluctuations load
    ± 25 %
  • Max. address capacity outputs
    2048 byte
  • Max. address capacity inputs
    2048 byte
  • Type code
    CPX-AP-I
  • Storage temperature
    -40 °C ... 70 °C
  • Product weight
    186 g
  • Housing material
    PA Die-cast zinc, nickel-plated
  • Dimensions W x L x H
    45 mm x 170 mm x 35 mm
  • Permissible voltage fluctuations for electronics/sensors
    ± 25 %
  • Intrinsic current consumption at nominal operating voltage load
    Typically 5 mA
  • Fieldbus interface, galvanic isolation
    yes
  • Intrinsic current consumption at nominal operating voltage for electronics/sensors
    Typically 90 mA
  • Fieldbus interface, protocol
    EtherCAT
  • Fieldbus interface, transmission rate
    100 Mbit/s
  • Nominal operating voltage DC for electronics/sensors
    24 V
  • Note regarding operating voltage
    SELV/PELV fixed power supplies required Note voltage drop
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Ambient temperature
    -20 °C ... 50 °C
  • Note on materials
    RoHS-compliant
  • Fieldbus interface, connection technology
    M12x1, D-coded as per EN 61076-2-101
  • Note on degree of protection
    Unused connections sealed
  • Fieldbus interface, function
    Bus connection, incoming/forwarding
  • Communication interface, connection type
    2x socket
  • Communication interface, function
    System communication XF20 OUT / XF21 OUT
  • Communication interface, protocol
    AP-COM
  • Communication interface, shielding
    yes
  • Voltage forwarding, number of pins/wires
    4
  • Power supply, number of pins/wires
    4
  • Power failure buffering
    10 ms
  • Degree of protection
    IP65 IP67
  • Type of mounting
    With through-hole

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.



Related documents 8086609 Specs

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts