8086608 Festo Electrical Peripheral Devices
Part#:8086608
Alt. Part#:CPX-AP-I-PB-M12
Manufacturer:Festo
Category:Electrical Peripheral Devices
Product Lifecycle:Active
Product description
PROFIBUS interface CPX-AP-I-PB-M12 Dimensions W x L x H: 45 mm x 170 mm x 35 mm, Diagnostics via LED: (* Buffer error LED (BF), * Diagnostics per module, * Power supply electronics/sensors, * Power supply load, * System diagnostics, * Maintenance required
Product Details
- Fieldbus interface, connection technology M12x1, B-coded as per EN 61076-2-101
- Fieldbus interface, connection type Plug
- Power supply, connection technology M8x1, A-coded as per EN 61076-2-104
- Diagnostics via bus Load switch-off Communication with AP module interrupted
- Intrinsic current consumption at nominal operating voltage for electronics/sensors Typically 80 mA
- Voltage forwarding, connection type Socket
- Communication interface, protocol AP-COM
- Voltage forwarding, function Outgoing electronics/sensors and load
- Nominal operating voltage DC load 24 V
- Communication interface, number of pins/wires 4
- Fieldbus interface 2, protocol PROFIBUS DP-V1
- Note on fieldbus interface Terminating resistor on socket possible
- Fieldbus interface 2, number of poles/wires 5
- Certification RCM compliance mark
- Dimensions W x L x H 45 mm x 170 mm x 35 mm
- Note on degree of protection Unused connections sealed
- Intrinsic current consumption at nominal operating voltage load Typically 5 mA
- Power supply, type of connection Plug
- Communication interface, shielding yes
- Fieldbus interface, number of poles/wires 5
- Power failure buffering 10 ms
- Fieldbus interface 2, connection technology M12x1, B-coded as per EN 61076-2-101
- Fieldbus interface 2, connection type Socket
- CE marking (see declaration of conformity) As per EU EMC directive
- Degree of protection IP65 IP67
- Type of mounting With through-hole
- KC characters KC EMC
- Communication interface, connection technology M8x1, D-coded as per EN 61076-2-114
- Fieldbus interface, function Incoming bus connection
- Relative air humidity 5 - 95 % Non-condensing
- Communication interface, function System communication XF20 OUT / XF21 OUT
- Max. cable length 50 m system communication
- Fieldbus interface, transmission rate 9.6 kbit/s 12 Mbit/s
- Max. address capacity outputs 244 byte
- Power supply, number of pins/wires 4
- Max. address capacity inputs 244 byte
- Fieldbus interface 2, function Bus connection, forwarding
- Reverse polarity protection yes
- Type code CPX-AP-I
- Product weight 186 g
- Fieldbus interface, type PROFIBUS
- Permissible voltage fluctuations for electronics/sensors ± 25 %
- Communication interface, connection type 2x socket
- Configuration support GSD file
- Diagnostics via LED Buffer error LED (BF) Maintenance required
- Voltage forwarding, number of pins/wires 4
- Note regarding operating voltage SELV/PELV fixed power supplies required Note voltage drop
- Fieldbus interface 2, type PROFIBUS
- Storage temperature -40 °C ... 70 °C
- Note on materials RoHS-compliant
- Max. power supply 2 x 4 A (external fuse required)
- Power supply, function Incoming electronics/sensors and load
- Voltage forwarding, connection technology M8x1, A-coded as per EN 61076-2-104
- Fieldbus interface, galvanic isolation yes
- Fieldbus interface, protocol PROFIBUS DP-V1
- Permissible voltage fluctuations load ± 25 %
- Nominal operating voltage DC for electronics/sensors 24 V
- Max. number of modules 56
- Fieldbus interface 2, galvanic isolation yes
- Fieldbus interface 2, transmission rate 1.5 mbps 93.75 kbps
- Corrosion resistance class (CRC) 1 - Low corrosion stress
- Ambient temperature -20 °C ... 50 °C
- Housing material PA Die-cast zinc, nickel-plated
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
8086608 Related Documents
Manufacturer warranty
8086608 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
PROFIBUS interface CPX-AP-I-PB-M12 Dimensions W x L x H: 45 mm x 170 mm x 35 mm, Diagnostics via LED: (* Buffer error LED (BF), * Diagnostics per module, * Power supply electronics/sensors, * Power supply load, * System diagnostics, * Maintenance required
What can I help you find today?
