8086606 Festo Electrical Peripheral Devices

Product Details

• Note on degree of protection
  Unused connections sealed
• Voltage forwarding, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Dimensions W x L x H
  30 mm x 170 mm x 35 mm
• Fuse protection inputs (short circuit)
  Internal electronic fuse per module
• Power supply, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Intrinsic current consumption at nominal operating voltage for electronics/sensors
  Typically 38 mA
• Diagnostics via LED
  Diagnostics per module Status per channel
• Voltage forwarding, function
  Outgoing electronics/sensors and load
• Electrical connection, input, number of pins/wires
  5
• Communication interface, number of pins/wires
  4
• Note regarding operating voltage
  SELV/PELV fixed power supplies required Note voltage drop
• Operating error limit related to the ambient temperature range
  ±0.15 % for voltage ±0.9 % for temperature
• Type code
  CPX-AP-I
• Note on materials
  RoHS-compliant
• Housing material
  PA Die-cast zinc, nickel-plated
• KC characters
  KC EMC
• Power supply, function
  Incoming electronics/sensors and load
• Relative air humidity
  5 - 95 % Non-condensing
• Communication interface, protocol
  AP-COM
• Electrical connection input, connection type
  4x socket
Power supply, number of pins/wires
4
Data format
15 bit + sign Linear scaling
CE marking (see declaration of conformity)
As per EU EMC directive
Type of mounting
With through-hole
Max. power supply
2 x 4 A (external fuse required)
Permissible voltage fluctuations for electronics/sensors
± 25 %
Power supply, type of connection
Plug
Communication interface, function
System communication XF10 IN / XF20 OUT
Electrical connection input, function
Analog input
Electrical input connection, connection technology
M12x1 A-coded as per EN 61076-2-101
Nominal operating voltage DC for electronics/sensors
24 V
Max. residual current of inputs per module
1 A
Electrical connection, input, note on connection technology
To achieve the technical specifications, the opposite side is shielded and must be designed with contact surfaces made from gold.
Basic error limit at 25°C
±0.1 % for voltage ±0.4 % for temperature
Reverse polarity protection
yes
Degree of protection
IP65 IP67
Ambient temperature
-20 °C ... 50 °C
Diagnose per internal communication
Wire break Lower limit value not complied with
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Communication interface, connection type
2x socket
Voltage forwarding, connection type
Socket
Electrical isolation of inputs between channels
no
Voltage forwarding, number of pins/wires
4
No. of inputs
4
Measured variable
Voltage Resistor
Signal range
-10 - 10 V 4 - 20 mA
Storage temperature
-40 °C ... 70 °C
Certification
RCM compliance mark
Max. cable length
30 m inputs 50 m system communication
Digital inputs, electrical isolation of input - internal communication
yes
Communication interface, shielding
yes
Power failure buffering
10 ms
Repetition accuracy
±0.025 % at 25 °C
Corrosion resistance class (CRC)
1 - Low corrosion stress
Product weight
166 g

Related documents 8086606 Specs