8086602 Festo Electrical Peripheral Devices

Product Details

• Diagnose per internal communication
  Short circuit/overload in sensor supply Electronics/sensors undervoltage
• Permissible voltage fluctuations for electronics/sensors
  ± 25 %
• Intrinsic current consumption at nominal operating voltage for electronics/sensors
  Typically 32 mA
• Communication interface, shielding
  yes
• Power supply, number of pins/wires
  4
• Power failure buffering
  10 ms
• Reverse polarity protection
  yes
• Dimensions W x L x H
  30 mm x 170 mm x 35 mm
• Max. power supply
  2 x 4 A (external fuse required)
• Relative air humidity
  5 - 95 % Non-condensing
• Power supply, type of connection
  Plug
• Max. cable length
  30 m inputs 50 m system communication
• Diagnostics via LED
  Diagnostics per module Status per channel
• Voltage forwarding, function
  Outgoing electronics/sensors and load
• Voltage forwarding, number of pins/wires
  4
• No. of inputs
  8
• Input debounce time
  0.1 ms 20 ms
• Switching level
  Signal 0: <= 5 V Signal 1: >= 11 V
• Input characteristics
  As per IEC 61131-2, type 3
• KC characters
  KC EMC
Fuse protection inputs (short circuit)
Internal electronic fuse per module
Power supply, connection technology
M8x1, A-coded as per EN 61076-2-104
Communication interface, connection type
2x socket
Electrical connection input, function
Digital input
Electrical isolation of inputs between channels
no
Nominal operating voltage DC for electronics/sensors
24 V
Type code
CPX-AP-I
Storage temperature
-40 °C ... 70 °C
Note on materials
RoHS-compliant
Note on degree of protection
Unused connections sealed
Voltage forwarding, connection technology
M8x1, A-coded as per EN 61076-2-104
Voltage forwarding, connection type
Socket
Digital inputs, electrical isolation of input - internal communication
yes
Electrical input connection, connection technology
M12x1 A-coded as per EN 61076-2-101
Max. residual current of inputs per module
1.8 A
Note regarding operating voltage
SELV/PELV fixed power supplies required Note voltage drop
Degree of protection
IP65 IP67
Certification
RCM compliance mark
Input switching logic
PNP (positive switching) 3-wire sensors as per IEC 61131-2
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Information on max. cable length
Power supply according to nominal voltage
Power supply, function
Incoming electronics/sensors and load
Communication interface, function
System communication XF10 IN / XF20 OUT
Communication interface, protocol
AP-COM
Electrical connection input, connection type
4x socket
Electrical connection, input, number of pins/wires
5
Communication interface, number of pins/wires
4
CE marking (see declaration of conformity)
As per EU EMC directive
Ambient temperature
-20 °C ... 50 °C
Type of mounting
With through-hole
Corrosion resistance class (CRC)
1 - Low corrosion stress
Product weight
126 g
Housing material
PA Die-cast zinc, nickel-plated

8086602 Related Documents