8086601 Festo Electrical Peripheral Devices

Product Details

• KC characters
  KC EMC
• Electrical connection output, connection type
  4x socket
• Fuse protection inputs (short circuit)
  Internal electronic fuse per module
• Electrical connection output, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Voltage forwarding, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Max. power supply
  2 x 4 A (external fuse required)
• Fuse protection outputs (short circuit)
  Internal electronic fuse per channel
• Power supply, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Electrical isolation of outputs between channels
  no
• Max. power supply per channel
  0.5 A
• Communication interface, function
  System communication XF10 IN / XF20 OUT
• Permissible voltage fluctuations load
  ± 25 %
• Voltage forwarding, function
  Outgoing electronics/sensors and load
• Voltage forwarding, number of pins/wires
  4
• No. of inputs
  4
• Max. residual current of inputs per module
  1.8 A
• Note regarding operating voltage
  SELV/PELV fixed power supplies required Note voltage drop
• Input debounce time
  0.1 ms 20 ms
• Ambient temperature
  -20 °C ... 50 °C
• Type of mounting
  With through-hole
Dimensions W x L x H
30 mm x 170 mm x 35 mm
Diagnose per internal communication
Load switch-off Load undervoltage
Note on degree of protection
Unused connections sealed
Power supply, function
Incoming electronics/sensors and load
Intrinsic current consumption at nominal operating voltage load
Typically 10 mA
Relative air humidity
5 - 95 % Non-condensing
Power supply, type of connection
Plug
Electrical connection input, function
Digital input
Electrical isolation of outputs between channel - internal communication
yes
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 35 mA
Digital inputs, electrical isolation of input - internal communication
yes
Electrical connection input, connection type
4x socket
Communication interface, shielding
yes
Power supply, number of pins/wires
4
Electrical output connection, number of pins/wires
3
Type code
CPX-AP-I
Switching level
Signal 0: <= 5 V Signal 1: >= 11 V
Corrosion resistance class (CRC)
1 - Low corrosion stress
Degree of protection
IP65 IP67
Characteristic curve outputs
As per IEC 61131-2, type 0.5
Switching logic at outputs
PNP (positive switching)
Note on materials
RoHS-compliant
Permissible voltage fluctuations for electronics/sensors
± 25 %
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Information on max. cable length
Power supply according to nominal voltage
Communication interface, connection type
2x socket
Max. cable length
30 m outputs 50 m system communication
Diagnostics via LED
Diagnostics per module Status per channel
Electrical connection output, function
Digital output
Electrical connection, input, number of pins/wires
3
Communication interface, number of pins/wires
4
Nominal operating voltage DC load
24 V
Power failure buffering
10 ms
Storage temperature
-40 °C ... 70 °C
Input characteristics
As per IEC 61131-2, type 3
Output delay with resistive load
Signal change 0->1: < 200 µs Signal change 1->0: < 200 µs
Voltage forwarding, connection type
Socket
Communication interface, protocol
AP-COM
Electrical isolation of inputs between channels
no
Electrical input connection, connection technology
M8x1, A-coded as per EN 61076-2-104
Nominal operating voltage DC for electronics/sensors
24 V
No. of outputs
4
Max. residual current of outputs per module
2 A
Reverse polarity protection
yes
CE marking (see declaration of conformity)
As per EU EMC directive
Certification
RCM compliance mark
Product weight
129 g
Input switching logic
PNP (positive switching) 3-wire sensors as per IEC 61131-2
Housing material
PA Die-cast zinc, nickel-plated

8086601 Related Documents