8084147 Festo Quarter Turn Actuators

Name: 8084147
Brand: Festo

Part#:8084147

Manufacturer:Festo

Alt. Part#:DFPD-N-1200-RP-90-RS60-F1012

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DFPD-N-1200-RP-90-RS60-F1012 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT contr

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8084147 Festo price in the box on the right side or send a quick quote.

Product Details

Size of valve actuator
1200
MTTFd
1126 years
End-position adjusting range at 0°
-5 deg ... 5 deg
Standard connection for valve
ISO 5211
Design
Gear rack/pinion
Closing direction
Clockwise closing
ATEX category gas
II 2G
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Information on operating and pilot media
Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 0° swivel angle
796.3 Nm
PFD
7.8E-4
Product weight
43022 g
Housing material
Wrought aluminum alloy, anodized
Safety function
The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
Swivel angle
90 deg
Depth shaft connection
29 mm
Mounting position
Any
Connection for valve positioner and position sensor conforms to standard
VDI/VDE 3845 size AA 3
Type of ignition protection for gas
Ex h IIC T4 Gb X
Type of (ignition) protection for dust
Ex h IIIC T105°C Db X

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Shaft connection

T27

Pneumatic connection

1/4 NPT

Note on materials

RoHS-compliant

Cam material

Steel

Operating pressure

2 bar ... 8 bar

End-position adjusting range at nominal swivel angle

-5 deg ... 5 deg

Valve connection conforms to standard

VDI/VDE 3845 (NAMUR)

Explosive ambient temperature

-20°C <= Ta <= +80°C

Spring return torque with 90° swivel angle

798.6 Nm

Material of sub-base

Wrought aluminum alloy, anodized

Material of spring

Spring steel

Material of screws

High-alloy stainless steel

Nominal operating pressure

6 bar

Maritime classification

See certificate

Flange hole pattern

F1012

Mode of operation

Single-acting

Safety integrity level (SIL)

Up to SIL 2 low demand mode up to SIL 1 high demand mode

ATEX category for dust

II 2D

Ambient temperature

-20 °C ... 80 °C

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Storage temperature

-20 °C ... 60 °C

Spring return torque at 0° swivel angle

479.4 Nm

Cover material

Die-cast aluminum, coated

Material of bearing

POM

Devices type according to VDMA 66413

Safety device

PFH

1.01E-7

Type code

DFPD

Symbol

00991266

Certified for safety function to ISO 13849 and IEC 61508 (SIL)

Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture

Certificate issuing authority

DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19

CE marking (see declaration of conformity)

as per EU explosion protection directive (ATEX)

Torque at nominal operating pressure and 90° swivel angle

477.2 Nm

Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°

43.5 l

Seals material

NBR

Material of piston

Die-cast aluminum

Shaft material

Steel, nickel-plated

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

MQDC1-506

Cordset: Single Ended A-Code M12; 5-pin Straight Female Connector; 2 m (6.56 ft) Black PVC Jacket; Nickel-Plated Brass Coupling Nut

Banner

184