8063639 Festo Manifold Dispensers

Product Details

• Fluid connector
  8x UNF1/4-28
• Duty cycle
  50 % (max. switch-on time 1 s)
• Width dimension
  9 mm
• Note on dosing precision
  Depending on the configuration, environment and application
• Information on medium
  Observe resistance of materials that come into contact with media
• Electrical power consumption
  1.8 W
• Type of control
  Direct
• Ambient temperature
  5 °C ... 40 °C
• Type of mounting
  Optionally: With internal thread and centering sleeve
• Note on fluid connector
  Fitting enclosed for pneumatic tubing with 3 mm outside diameter
• Electrical connection
  9-pin Sub-D
• Operating pressure
  0 bar ... 0.5 bar
• Relative air humidity
  0 - 95 % Non-condensing
• Application note
  See application note (available on the support portal at festo.com)
• Medium
  Liquid media
• Nominal width
  0.8 mm
• Reset method
  Mechanical spring
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Valve function
  2/2, closed, monostable
Mounting position
Any
Material of dosing needle
High-alloy stainless steel
Internal volume
113 µl valve with fluid connections
Note on switching frequency
Dependent on the ambient temperature and installation state
Typical dosing precision
<1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Note on switching time off
Depending on the configuration, environment and application
Note on degree of protection
In mounted state
Type code
VTOE
Sealing principle
Soft
Permissible voltage fluctuations
+/- 10 %
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC)
0 - No corrosion stress
Note on power consumption
Specification per pneumatic valve
Storage temperature
-20 °C ... 70 °C
Water flow rate at max. operating pressure
2000 µl/s
Nominal altitude of use above sea level
<= 2000 m NHN
Note on switching time on
Depending on the configuration, environment and application
Min. dosing volume
5 µl
On switching time
7 ms
Nominal operating voltage DC
24 V
Degree of protection
IP30
Actuation type
Electrical
Materials in contact with the media
ETFE High-alloy stainless steel
Material number for dosing needle
1.4301
Product weight
220 g
Nominal width of dosing needle
1 mm
Note on dosing volume
Depending on the configuration, environment and application
Contamination level
2
Length of dosing needle
30 mm
Switching time off
2 ms
Max. switching frequency
4 Hz
Temperature of medium
5 °C ... 50 °C

Related documents 8063639 Specs