8063636 Festo Manifold Dispensers

Product Details

• Mounting position
  Any
• Material of dosing needle
  High-alloy stainless steel
• Product weight
  220 g
• Relative air humidity
  0 - 95 % Non-condensing
• Type of control
  Direct
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Fluid connector
  8x UNF1/4-28
• Note on fluid connector
  Fitting enclosed for pneumatic tubing with 3 mm outside diameter
• Electrical connection
  9-pin Sub-D
• Internal volume
  113 µl valve with fluid connections
• Note on dosing volume
  Depending on the configuration, environment and application
• Information on medium
  Observe resistance of materials that come into contact with media
• Note on switching time off
  Depending on the configuration, environment and application
• Min. dosing volume
  5 µl
• Electrical power consumption
  1.8 W
• Reset method
  Mechanical spring
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Temperature of medium
  5 °C ... 50 °C
• Actuation type
  Electrical
Type of mounting
Optionally: With internal thread and centering sleeve
Note on power consumption
Specification per pneumatic valve
Width dimension
9 mm
Water flow rate at max. operating pressure
2000 µl/s
Note on switching frequency
Dependent on the ambient temperature and installation state
Typical dosing precision
<1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Contamination level
2
Length of dosing needle
30 mm
Switching time off
2 ms
Sealing principle
Soft
Permissible voltage fluctuations
+/- 10 %
Degree of protection
IP30
Valve function
2/2, closed, monostable
Material number for dosing needle
1.4301
Nominal width of dosing needle
1 mm
Operating pressure
0 bar ... 0.5 bar
Nominal altitude of use above sea level
<= 2000 m NHN
Note on switching time on
Depending on the configuration, environment and application
Medium
Liquid media
On switching time
7 ms
Nominal width
0.8 mm
Max. switching frequency
4 Hz
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Materials in contact with the media
ETFE High-alloy stainless steel
Duty cycle
50 % (max. switch-on time 1 s)
Storage temperature
-20 °C ... 70 °C
Note on dosing precision
Depending on the configuration, environment and application
Application note
See application note (available on the support portal at festo.com)
Note on degree of protection
In mounted state
Type code
VTOE
Nominal operating voltage DC
24 V
Ambient temperature
5 °C ... 40 °C

Related documents 8063636 Specs