8063635 Festo Manifold Dispensers

Product Details

• Type of mounting
  Optionally: With internal thread and centering sleeve
• Note on power consumption
  Specification per pneumatic valve
• Storage temperature
  -20 °C ... 70 °C
• Operating pressure
  0 bar ... 0.5 bar
• Typical dosing precision
  <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
• Note on switching time off
  Depending on the configuration, environment and application
• Electrical power consumption
  1.8 W
• Materials in contact with the media
  ETFE High-alloy stainless steel
• Material number for dosing needle
  1.4301
• Internal volume
  113 µl valve with fluid connections
• Note on dosing volume
  Depending on the configuration, environment and application
• Nominal altitude of use above sea level
  <= 2000 m NHN
• Application note
  See application note (available on the support portal at festo.com)
• Min. dosing volume
  3 µl
• On switching time
  7 ms
• Reset method
  Mechanical spring
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Ambient temperature
  5 °C ... 40 °C
• Valve function
  2/2, closed, monostable
• Mounting position
  Any
Material of dosing needle
High-alloy stainless steel
Nominal width of dosing needle
0.6 mm
Note on switching frequency
Dependent on the ambient temperature and installation state
Contamination level
2
Medium
Liquid media
Length of dosing needle
30 mm
Type code
VTOE
Permissible voltage fluctuations
+/- 10 %
Corrosion resistance class (CRC)
0 - No corrosion stress
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Duty cycle
50 % (max. switch-on time 1 s)
Electrical connection
9-pin Sub-D
Product weight
220 g
Relative air humidity
0 - 95 % Non-condensing
Note on switching time on
Depending on the configuration, environment and application
Switching time off
2 ms
Type of control
Direct
Degree of protection
IP30
Fluid connector
8x UNF1/4-28
Note on fluid connector
Fitting enclosed for pneumatic tubing with 3 mm outside diameter
Width dimension
9 mm
Water flow rate at max. operating pressure
1300 µl/s
Note on dosing precision
Depending on the configuration, environment and application
Information on medium
Observe resistance of materials that come into contact with media
Note on degree of protection
In mounted state
Nominal width
0.8 mm
Max. switching frequency
4 Hz
Sealing principle
Soft
Nominal operating voltage DC
24 V
Temperature of medium
5 °C ... 50 °C
Actuation type
Electrical

8063635 Related Documents