8063634 Festo Manifold Dispensers
Part#:8063634
Manufacturer:Festo
Alt. Part#:VTOE-8-D7-T3-M22C-08-V-S-PC-M
Product Lifecycle:Active
Get a quick Quote!
dispense head VTOE-8-D7-T3-M22C-08-V-S-PC-M Valve function: 2/2 closed, monostable, Operating pressure MPa: 0 - 0,05 MPa, Operating pressure: 0 - 0,5 bar, Operating pressure [psi]: 0 - 7,25 psi, Internal volume: 113 µl valve with fluid connections
About the manufacturer: Festo is one of the manufacturers that offers Manifold Dispensers that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8063634 Festo price in the box on the right side or send a quick quote.
Product Details
- Materials in contact with the media ETFE High-alloy stainless steel
- Duty cycle 50 % (max. switch-on time 1 s)
- Width dimension 9 mm
- Product weight 220 g
- Note on dosing precision Depending on the configuration, environment and application
- Typical dosing precision <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
- Note on switching time off Depending on the configuration, environment and application
- Electrical power consumption 1.8 W
- Type code VTOE
- Type of control Direct
- Permissible voltage fluctuations +/- 10 %
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Fluid connector 8x UNF1/4-28
- Note on fluid connector Fitting enclosed for pneumatic tubing with 3 mm outside diameter
- Electrical connection 9-pin Sub-D
- Water flow rate at max. operating pressure 370 µl/s
- Relative air humidity 0 - 95 % Non-condensing
- Information on medium Observe resistance of materials that come into contact with media
- Note on degree of protection In mounted state
- On switching time 7 ms
- Sealing principle Soft
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Temperature of medium 5 °C ... 50 °C
- Actuation type Electrical
- Type of mounting Optionally: With internal thread and centering sleeve
- Note on power consumption Specification per pneumatic valve
- Nominal width of dosing needle 0.32 mm
- Note on switching frequency Dependent on the ambient temperature and installation state
- Note on switching time on Depending on the configuration, environment and application
- Length of dosing needle 30 mm
- Switching time off 2 ms
- Nominal operating voltage DC 24 V
- Degree of protection IP30
- Valve function 2/2, closed, monostable
- Mounting position Any
- Material of dosing needle High-alloy stainless steel
- Storage temperature -20 °C ... 70 °C
- Operating pressure 0 bar ... 0.5 bar
- Nominal altitude of use above sea level <= 2000 m NHN
- Application note See application note (available on the support portal at festo.com)
- Medium Liquid media
- Max. switching frequency 4 Hz
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Ambient temperature 5 °C ... 40 °C
- Material number for dosing needle 1.4301
- Internal volume 113 µl valve with fluid connections
- Note on dosing volume Depending on the configuration, environment and application
- Contamination level 2
- Min. dosing volume 1 µl
- Nominal width 0.8 mm
- Reset method Mechanical spring
- Corrosion resistance class (CRC) 0 - No corrosion stress
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 8063634 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Relevant products
What can I help you find today?
