8063369 Festo Manifold Dispensers

Product Details

• Switching time off
  2 ms
• On switching time
  7 ms
• Storage temperature
  -20 °C ... 70 °C
• Note on dosing volume
  Depending on the configuration, environment and application
• Note on switching frequency
  Dependent on the ambient temperature and installation state
• Note on switching time off
  Depending on the configuration, environment and application
• Mounting position
  Any
• Wire ends
  Stripped
• Nominal width of dosing needle
  0.32 mm
• Relative air humidity
  0 - 95 % Non-condensing
• Contamination level
  2
• Electrical power consumption
  1.8 W
• Type of control
  Direct
• Degree of protection
  IP30
• Materials in contact with the media
  ETFE High-alloy stainless steel
• Material number for dosing needle
  1.4301
• Product weight
  18 g
• Operating pressure
  0 bar ... 0.5 bar
• Information on medium
  Observe resistance of materials that come into contact with media
• Length of dosing needle
  30 mm
Reset method
Mechanical spring
Temperature of medium
5 °C ... 50 °C
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Fluid connector
UNF1/4-28
Note on fluid connector
Fitting enclosed for pneumatic tubing with 3 mm outside diameter
Material of dosing needle
High-alloy stainless steel
Electrical connection
2-wire Open end
Cable length
0.15 m
Internal volume
113 µl valve with fluid connections
Note on dosing precision
Depending on the configuration, environment and application
Typical dosing precision
<1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Application note
See application note (available on the support portal at festo.com)
Medium
Liquid media
Min. dosing volume
1 µl
Sealing principle
Soft
Nominal operating voltage DC
24 V
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
5 °C ... 40 °C
Valve function
2/2, closed, monostable
Type of mounting
With internal thread and centering sleeve
Duty cycle
100 % with individual mounting 50 % in case of block mounting (max. switch-on time 1 s)
Nominal conductor cross section
AWG28
Width dimension
9 mm
Water flow rate at max. operating pressure
370 µl/s
Nominal altitude of use above sea level
<= 2000 m NHN
Note on switching time on
Depending on the configuration, environment and application
Note on degree of protection
In mounted state
Nominal width
0.8 mm
Type code
VTOE
Max. switching frequency
4 Hz
Permissible voltage fluctuations
+/- 10 %
Actuation type
Electrical
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

8063369 Related Documents