8059847 Festo Electrical Peripheral Devices

Product Details

• Min. available sensor voltage
  20.7 V at 20 mA
• Diagnostics
  Wire break per channel Overflow/underflow
• Repetition accuracy
  0.05 % at 25 °C
• Corrosion resistance class (CRC)
  1 - Low corrosion stress (when installed)
• Data format
  15 bit + sign Scalable to 15 bits
• Housing material
  PA-reinforced PC
• Dimensions W x L x H
  (incl. interlinking block and connection system) 50 mm x 107 mm x 70 mm
• Signal range
  0 - 20 mA 4–20 mA with HART
• Max. short circuit current
  22 mA
• Reverse polarity protection
  for all electrical connections
• Fuse protection (short circuit)
  Internal electronic fuse per channel
• Basic error limit at 25°C
  ±0.1 %
• Electrical isolation between channels
  no
• Product weight
  77.4 g
• Type of mounting
  On interlinking block
• Max. open circuit voltage
  28.8 V
• Type code
  CPX
• Parameterization
  Data format Response to short circuit/overload
• Operating error limit related to the ambient temperature range
  ±0.3 %
• Electrical isolation between channel and internal bus
  yes
CE marking (see declaration of conformity)
As per EU EMC directive
Max. cable length
500 m
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Max. input resistance
300 Ohm
Width dimension
50 mm
LED indicators
1 group diagnostics 4 channel status
Intrinsic current consumption at nominal operating voltage
Typ. 170 mA
Power failure buffering
10 ms
Relative air humidity
95 % Non-condensing
Ambient temperature
-5 °C ... 50 °C
Sensor type
0 - 20 mA 4–20 mA with HART
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Number of selectable analog inputs/outputs
4
Max. load
750 Ohm
Control elements
DIL switch
DC operating voltage range
18 V ... 30 V
Nominal operating voltage DC
24 V
Storage temperature
-20 °C ... 70 °C
Degree of protection
Depends on manifold block
Protocol
HART
Note on materials
RoHS-compliant

8059847 Related Documents