8058479 Festo Flow Sensors

Product Details

• Electrical connection 1, connection technology
  M8x1 A-coded as per EN 61076-2-104
• Idle current
  ≤ 25 mA
• Flow direction
  Unidirectional
• Operating medium
  Argon Nitrogen
• Accuracy of flow rate
  ± (2% o.m.v. + 1% FS)
• Temperature co-efficient margin in ± %FS/K
  typ. 0.15% FS/K
• Short-circuit protection
  yes
• IO-Link®, port class
  A
• Reverse polarity protection
  for all electrical connections
• Housing material
  PA-reinforced
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• KC characters
  KC EMC
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Certificate issuing authority
  UL E322346
• Flow measuring range start value
  4 l/min
• Zero point repetition accuracy in ± %FS
  0.2 %FS
• Max. output current
  100 mA
• Max. load resistance of current output
  500 Ohm
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, SIO mode support
  Yes
IO-Link®, data memory required
< 500 byte
Product weight
90 g
Materials in contact with the media
Wrought aluminum alloy, anodized High-alloy stainless steel
Degree of protection
IP40
Pneumatic connection, outlet direction
Straight
Symbol
00995794
Note on materials
RoHS-compliant
Method of measurement
Heat transfer
Nominal temperature
23 °C
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, start value
0 l/min
Overload protection
Available
IO-Link®, profile
Smart sensor profile
IO-Link®, service data contents IN
32 bit volume/mass measurement
Mounting position
Any
Displayable unit(s)
g scft/min
Pressure drop
56 mbar
Type code
SFAH
Electrical connection for input 1, connection pattern
00991171
Electrical connection 1, connection type
Plug
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Measuring principle
Thermal
Operating pressure
-0.9 bar ... 10 bar
Ambient temperature
0 °C ... 50 °C
Pressure influence of margin in ±%FS/bar
1 %FS/b.
Switching element function
N/C contact/N/O contact switchable
Flow characteristic curve, end value
200 l/min
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data width IN
3 Byte
DC operating voltage range
22 V ... 26 V
Type of mounting
With accessories
Setting options
IO-Link® Via display and pushbuttons
Protection against tampering
IO-Link® PIN code
Electrical connection 1, number of pins/wires
4
Measured variable
Mass flow rate Volumetric flow rate
Flow measuring range end value
200 l/min
Temperature of medium
0 °C ... 50 °C
Repetition accuracy margin in ± %FS
0.8 %FS
Switching function
Window comparator Auto difference monitoring
Analog output
0 - 10 V 1 - 5 V
Min. load resistance of voltage output
20 kOhm
Protocol
IO-Link®
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data content IN
1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
IO-Link®, minimum cycle time
4 ms
Pneumatic connection
Internal thread G1/4
Display type
Illuminated LCD, multi-color
Protection class
III

Related documents 8058479 Specs