8058473 Festo Flow Sensors

Name: 8058473
Brand: Festo

Festo 8058473 flow sensor SFAH-50U-G18FS-PNLK-PNVBA-M8 Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Certificate issuing department: U

Part#:8058473

Manufacturer:Festo

Alt. Part#:SFAH-50U-G18FS-PNLK-PNVBA-M8

Product Lifecycle:Active

Get a quick Quote!

flow sensor SFAH-50U-G18FS-PNLK-PNVBA-M8 Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Certificate issuing department: U

About the manufacturer: Festo is one of the manufacturers that offers Flow Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8058473 Festo price in the box on the right side or send a quick quote.

Product Details

Type code
SFAH
Electrical connection 1, connection type
Plug
Symbol
00995794
Switching output
2 x PNP or 2 x NPN switchable
Max. output current
100 mA
Flow characteristic curve, start value
0 l/min
IO-Link®, profile
Smart sensor profile
IO-Link®, port class
A
IO-Link®, process data content IN
1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
Pneumatic connection
Internal thread G1/8
Displayable unit(s)
g scft/min
Pressure drop
12 mbar
Pneumatic connection, outlet direction
Straight
KC characters
KC EMC
Certificate issuing authority
UL E322346
Flow measuring range start value
1 l/min
Operating pressure
-0.9 bar ... 10 bar
Switching function
Window comparator Auto difference monitoring
Pressure influence of margin in ±%FS/bar
1 %FS/b.
Max. load resistance of current output
500 Ohm

Overload protection

Available

IO-Link®, SIO mode support

Yes

DC operating voltage range

22 V ... 26 V

Reverse polarity protection

for all electrical connections

Housing material

PA-reinforced

Degree of protection

IP40

Electrical connection 1, connection technology

M8x1 A-coded as per EN 61076-2-104

Certification

RCM compliance mark c UL us - Listed (OL)

Measured variable

Mass flow rate Volumetric flow rate

Flow measuring range end value

50 l/min

Ambient temperature

0 °C ... 50 °C

Nominal temperature

23 °C

Zero point repetition accuracy in ± %FS

0.2 %FS

Temperature co-efficient margin in ± %FS/K

typ. 0.15% FS/K

Min. load resistance of voltage output

20 kOhm

IO-Link®, function classes

Binary data channel (BDC) Teach channel

IO-Link®, minimum cycle time

4 ms

Mounting position

Any

Display type

Illuminated LCD, multi-color

Protection class

III

Protection against tampering

IO-Link® PIN code

Electrical connection 1, number of pins/wires

CE marking (see declaration of conformity)

As per EU EMC directive As per EU RoHS directive

Measuring principle

Thermal

Temperature of medium

0 °C ... 50 °C

Accuracy of flow rate

± (2% o.m.v. + 1% FS)

Switching element function

N/C contact/N/O contact switchable

Flow characteristic curve, end value

50 l/min

Protocol

IO-Link®

IO-Link®, protocol version

Device V 1.1

IO-Link®, data memory required

< 500 byte

IO-Link®, service data contents IN

32 bit volume/mass measurement

Materials in contact with the media

Wrought aluminum alloy, anodized High-alloy stainless steel

Setting options

IO-Link® Via display and pushbuttons

Electrical connection for input 1, connection pattern

00991171

Idle current

≤ 25 mA

Note on materials

RoHS-compliant

Flow direction

Unidirectional

Method of measurement

Heat transfer

Operating medium

Argon Nitrogen

Repetition accuracy margin in ± %FS

0.8 %FS

Analog output

0 - 10 V 1 - 5 V

Short-circuit protection

yes

IO-Link®, communication mode

COM2 (38,4 kBd)

IO-Link®, process data width IN

3 Byte

Type of mounting

With accessories

Product weight

90 g

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

QOB210

Square D by Schneider Electric QOB210 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 10A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 14-8AWG for 1 cable Al/Cu. It is a 2 Pole device with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are of the press plate type.

Schneider Electric

RXM4AB2BD

Schneider Electric RXM4AB2BD is a miniature plug-in relay within the RXM sub-range, featuring contacts made from an Ag/Ni - Silver - Nickel alloy. This relay is designed with 4C/O - 4PDT (4 Pole Double Throw) contact type, and operates with a control voltage of 24 Vdc. It is rated for a current of 6 A at both 250Vac (AC-1) and 28Vac (DC-1). The RXM4AB2BD offers plug-in mounting mode and can operate within an ambient air temperature range of -40 to +55 °C. It has an IP40 degree of protection and a current consumption of 0.038 A. This model includes a visual position indicator through an LED, consumes 0.9 W of power, and boasts an electrical durability of 100,000 operations with a resistive load, alongside a mechanical durability of 10,000,000 operations at no load. Additionally, it features a Lockable Test Button (LTB) for latching.

Schneider Electric

PKGTAB

Schneider Electric PKGTAB, Load center accessory, QO/Homeline, insulator kit, for ground bars

Schneider Electric

MQDC1-506

Banner Engineering MQDC1-506 is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.6mm diameter PVC cable and a length of 6.5ft (2m). The cable is equipped with a 5-pin Euro-style M12 female straight connector and bare end flying leads for connectivity. The connection nut is made from nickel-plated brass, ensuring durability. This model operates effectively within an ambient air temperature range of -40 to +105°C and offers a degree of protection rated at IP67, making it suitable for challenging environments. The cable's sheathing is black, and it is rated for a voltage of 250Vac.

Banner

184

EL1809

Beckhoff HD Ethercat Terminal, 16 Chnnl

Beckhoff

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric