8058469 Festo Flow Sensors

Product Details

• Electrical connection 1, number of pins/wires
  4
• Idle current
  ≤ 25 mA
• Flow direction
  Unidirectional
• Method of measurement
  Heat transfer
• Nominal temperature
  23 °C
• Accuracy of flow rate
  ± (2% o.m.v. + 1% FS)
• Flow characteristic curve, end value
  10 l/min
• Max. load resistance of current output
  500 Ohm
• IO-Link®, port class
  A
• Protection against tampering
  IO-Link® PIN code
• Electrical connection 1, connection technology
  Connection diagram L1J
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Measuring principle
  Thermal
• Ambient temperature
  0 °C ... 50 °C
• Zero point repetition accuracy in ± %FS
  0.2 %FS
• Switching output
  2 x PNP or 2 x NPN switchable
• Switching element function
  N/C contact/N/O contact switchable
• Short-circuit protection
  yes
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, SIO mode support
  Yes
IO-Link®, process data width IN
3 Byte
Reverse polarity protection
for all electrical connections
Product weight
60 g
Setting options
IO-Link® Via display and pushbuttons
Protection class
III
Type code
SFAH
Electrical connection for input 1, connection pattern
00995428
Certification
RCM compliance mark c UL us - Listed (OL)
Note on materials
RoHS-compliant
Measured variable
Mass flow rate Volumetric flow rate
Temperature of medium
0 °C ... 50 °C
Temperature co-efficient margin in ± %FS/K
typ. 0.15% FS/K
Max. output current
100 mA
Protocol
IO-Link®
IO-Link®, minimum cycle time
4 ms
Pneumatic connection
For pneumatic tubing outside diameter 6 mm
Degree of protection
IP40
Electrical connection 1, connection type
Plug
Symbol
00995795
Certificate issuing authority
UL E322346
Operating medium
Argon Nitrogen
Pressure influence of margin in ±%FS/bar
1 %FS/b.
Switching function
Window comparator Auto difference monitoring
Flow characteristic curve, start value
0 l/min
Overload protection
Available
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data content IN
1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
DC operating voltage range
22 V ... 26 V
Display type
Illuminated LCD, multi-color
Displayable unit(s)
g scft/min
Pneumatic connection, outlet direction
Straight
KC characters
KC EMC
Flow measuring range start value
0.2 l/min
Operating pressure
-0.9 bar ... 10 bar
Flow measuring range end value
10 l/min
Repetition accuracy margin in ± %FS
0.8 %FS
Analog output
0 - 10 V 1 - 5 V
Min. load resistance of voltage output
20 kOhm
IO-Link®, profile
Smart sensor profile
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, service data contents IN
32 bit volume/mass measurement
Type of mounting
With accessories
Materials in contact with the media
Wrought aluminum alloy, anodized High-alloy stainless steel
Pressure drop
< 5 mbar
IO-Link®, data memory required
< 500 byte
Mounting position
Any
Housing material
PA-reinforced
Corrosion resistance class (CRC)
2 - Moderate corrosion stress

8058469 Related Documents