8058463 Festo Flow Sensors

Product Details

• Protection against tampering
  IO-Link® PIN code
• Electrical connection 1, connection technology
  Connection diagram L1J
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Electrical connection for input 1, connection pattern
  00995428
• KC characters
  KC EMC
• Note on materials
  RoHS-compliant
• Measuring principle
  Thermal
• Flow measuring range start value
  0.01 l/min
• Ambient temperature
  0 °C ... 50 °C
• Switching function
  Window comparator Auto difference monitoring
• Pneumatic connection, outlet direction
  Straight
• Idle current
  ≤ 25 mA
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Certificate issuing authority
  UL E322346
• Flow measuring range end value
  0.5 l/min
• Accuracy of flow rate
  ± (2% o.m.v. + 1% FS)
• Zero point repetition accuracy in ± %FS
  0.2 %FS
• Analog output
  0 - 10 V 1 - 5 V
• Min. load resistance of voltage output
  20 kOhm
• Max. load resistance of current output
  500 Ohm
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data content IN
1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
DC operating voltage range
22 V ... 26 V
Mounting position
Any
Display type
Illuminated LCD, multi-color
Degree of protection
IP40
Electrical connection 1, number of pins/wires
4
Measured variable
Mass flow rate Volumetric flow rate
Repetition accuracy margin in ± %FS
0.8 %FS
Switching element function
N/C contact/N/O contact switchable
IO-Link®, process data width IN
3 Byte
Reverse polarity protection
for all electrical connections
Materials in contact with the media
Wrought aluminum alloy, anodized High-alloy stainless steel
Pressure drop
< 5 mbar
Type code
SFAH
Electrical connection 1, connection type
Plug
Symbol
00995795
Flow direction
Unidirectional
Operating pressure
-0.9 bar ... 10 bar
Nominal temperature
23 °C
Temperature co-efficient margin in ± %FS/K
typ. 0.15% FS/K
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, end value
0.5 l/min
Protocol
IO-Link®
IO-Link®, profile
Smart sensor profile
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, data memory required
< 500 byte
Product weight
60 g
Housing material
PA-reinforced
Protection class
III
Method of measurement
Heat transfer
Operating medium
Argon Nitrogen
Temperature of medium
0 °C ... 50 °C
Pressure influence of margin in ±%FS/bar
1 %FS/b.
Flow characteristic curve, start value
0 l/min
Short-circuit protection
yes
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Type of mounting
With accessories
Pneumatic connection
For pneumatic tubing outside diameter 4 mm
Displayable unit(s)
g scft/h
Max. output current
100 mA
Overload protection
Available
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit volume/mass measurement
IO-Link®, minimum cycle time
4 ms
Setting options
IO-Link® Via display and pushbuttons
Corrosion resistance class (CRC)
2 - Moderate corrosion stress

8058463 Related Documents