8030614 Festo Quarter Turn Actuators

Product Details

• Flange hole pattern
  F04
• Standard connection for valve
  ISO 5211
• Mounting position
  Any
• Swivel angle
  90 deg
• Type code
  DAPS
• Design
  Scotch yoke system
• Symbol
  00991266
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Spring return torque at 0° swivel angle
  10 Nm
• Spring force
  4
• Pneumatic connection
  G1/8
• Material number for shaft
  1.4305
• Size of valve actuator
  0015
• Depth shaft connection
  13.2 mm
• Information on the end-position adjusting range
  One end position optionally adjustable
• Closing direction
  Clockwise closing
• Connection pressure for spring force
  5.6 bar
• Type of ignition protection for gas
  Ex h IIC T6...T3 Gb X
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Spring return torque with 50° swivel angle
7.5 Nm
Seals material
FPM PTFE-reinforced
Housing material
Wrought aluminum alloy
Mode of operation
Single-acting
Position sensing
None
ATEX category gas
II 2G
ATEX category for dust
II 2D
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Torque at nominal operating pressure and 0° swivel angle
15 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
0.63 l
Cover material
Wrought aluminum alloy
Material of screws
High-alloy steel
End-position adjusting range at 0°
-1 deg ... 9 deg
End-position adjusting range at nominal swivel angle
81 deg ... 91 deg
Cushioning
No cushioning
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Explosive ambient temperature
-20°C <= Ta <= +150°C
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 90° swivel angle
10 Nm
Shaft connection
T11
Product weight
1200 g
Shaft material
High-alloy steel
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Operating pressure
5.6 bar ... 8.4 bar
Ambient temperature
-20 °C ... 150 °C
Corrosion resistance class (CRC)
3 - High corrosion stress
Torque at nominal operating pressure and 50° swivel angle
7.5 Nm
Spring return torque with 90° swivel angle
15 Nm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

8030614 Related Documents