8030607 Festo Quarter Turn Actuators

Product Details

• Depth shaft connection
  24.8 mm
• Size of valve actuator
  0240
• Type code
  DAPS
• Mode of operation
  Double-acting
• Type of ignition protection for gas
  Ex h IIC T6...T3 Gb X
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Corrosion resistance class (CRC)
  3 - High corrosion stress
• Pneumatic connection
  G1/8
• Shaft material
  High-alloy steel
• Flange hole pattern
  F07 F10
• Standard connection for valve
  ISO 5211
• Design
  Scotch yoke system
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• ATEX category for dust
  II 2D
• Ambient temperature
  -20 °C ... 150 °C
• CE marking (see declaration of conformity)
  as per EU explosion protection directive (ATEX)
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  9.1 l
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Swivel angle
  90 deg
• Cushioning
  No cushioning
Position sensing
None
Operating pressure
3 bar ... 8.4 bar
ATEX category gas
II 2G
Torque at nominal operating pressure and 0° swivel angle
240 Nm
Product weight
5400 g
Cover material
Wrought aluminum alloy
End-position adjusting range at 0°
-1 deg ... 9 deg
Mounting position
Any
Symbol
00991265
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 50° swivel angle
120 Nm
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Housing material
Wrought aluminum alloy
Material of screws
High-alloy steel
Closing direction
Clockwise closing
Nominal operating pressure
5.6 bar
Explosive ambient temperature
-20°C <= Ta <= +150°C
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Torque at nominal operating pressure and 90° swivel angle
180 Nm
Shaft connection
T22
Seals material
FPM PTFE-reinforced
Material number for shaft
1.4305

8030607 Related Documents