8030603 Festo Quarter Turn Actuators

Product Details

• Swivel angle
  90 deg
• Standard connection for valve
  ISO 5211
• Design
  Scotch yoke system
• Nominal operating pressure
  5.6 bar
• Explosive ambient temperature
  -20°C <= Ta <= +150°C
• Corrosion resistance class (CRC)
  3 - High corrosion stress
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  2.1 l
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Shaft material
  High-alloy steel
• End-position adjusting range at 0°
  -1 deg ... 9 deg
• Mounting position
  Any
• Symbol
  00991265
• Type of ignition protection for gas
  Ex h IIC T6...T3 Gb X
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Torque at nominal operating pressure and 90° swivel angle
  45 Nm
• Pneumatic connection
  G1/8
• Housing material
  Wrought aluminum alloy
• Flange hole pattern
  F04
• Type code
  DAPS
• Mode of operation
  Double-acting
Closing direction
Clockwise closing
Operating pressure
3 bar ... 8.4 bar
ATEX category for dust
II 2D
Ambient temperature
-20 °C ... 150 °C
Torque at nominal operating pressure and 0° swivel angle
60 Nm
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Size of valve actuator
0060
Depth shaft connection
16.5 mm
Cushioning
No cushioning
Position sensing
None
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
ATEX category gas
II 2G
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Torque at nominal operating pressure and 50° swivel angle
30 Nm
Shaft connection
T14
Cover material
Wrought aluminum alloy
Material of screws
High-alloy steel
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Product weight
1600 g
Seals material
FPM PTFE-reinforced
Material number for shaft
1.4305

8030603 Related Documents