8030599 Festo Quarter Turn Actuators

Product Details

• Size of valve actuator
  0015
• Cushioning
  No cushioning
• Closing direction
  Clockwise closing
• Symbol
  00991265
• Explosive ambient temperature
  -20°C <= Ta <= +150°C
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Shaft connection
  T11
• Cover material
  Wrought aluminum alloy
• Shaft material
  High-alloy steel
• Flange hole pattern
  F03
• Depth shaft connection
  13.2 mm
• Design
  Scotch yoke system
• Operating pressure
  3 bar ... 8.4 bar
• Nominal operating pressure
  5.6 bar
• Type of (ignition) protection for dust
  Ex h IIIC T85°C...T200°C Db X
• Corrosion resistance class (CRC)
  3 - High corrosion stress
• Note about the torque
  The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Swivel angle
  90 deg
Type code
DAPS
Mode of operation
Double-acting
ATEX category gas
II 2G
ATEX category for dust
II 2D
Torque at nominal operating pressure and 0° swivel angle
15 Nm
Product weight
750 g
Housing material
Wrought aluminum alloy
Mounting position
Any
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 50° swivel angle
7.5 Nm
Pneumatic connection
G1/8
Material number for shaft
1.4305
End-position adjusting range at 0°
-1 deg ... 9 deg
Standard connection for valve
ISO 5211
Position sensing
None
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Ambient temperature
-20 °C ... 150 °C
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 90° swivel angle
11.3 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
0.56 l
Seals material
FPM PTFE-reinforced
Material of screws
High-alloy steel

8030599 Related Documents