578818 Festo Directional Control Valves

Name: 578818
Brand: Festo

Part#:578818

Manufacturer:Festo

Category:Directional Control Valves

Alt. Part#:VMPA14-M1HF-KS-PI

Product Lifecycle:Active

Get a quick Quote!

solenoid valve VMPA14-M1HF-KS-PI Valve function: 2x3/2 closed, monostable, Type of actuation: electrical, Valve size: 14 mm, Standard nominal flow rate: 470 - 560 l/min, Operating pressure: -0,9 - 8 bar

About the manufacturer: Festo is one of the manufacturers that offers Directional Control Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 578818 Festo price in the box on the right side or send a quick quote.

Product Details

Suitability for vacuum
yes
Valve function
2x3/2, closed, monostable
Operating pressure
-0.9 bar ... 8 bar
Operating voltage
24V DC
Degree of protection
IP65 as per IEC 60529
Flow direction
Reversible
Pilot pressure
3 bar ... 8 bar
Permissible voltage fluctuations
+/- 25 %
Note on standard nominal flow rate
MPA-L: 560 l/min MPA-S: 470 l/min
Valve size
14 mm
Type of control
Pilot-controlled
Symbol
00992874
Lap
Overlap
Actuation type
Electrical
Relative air humidity
Max. 90 % at 40 °C
Pilot pressure MPa
0.3 MPa ... 0.8 MPa
Reset method
Mechanical spring
Certification
c UL us - Recognized (OL)
Manual override
Detenting Non-detenting
Standard nominal flow rate with QS-8
470 l/min ... 560 l/min

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Storage temperature

-20 °C ... 40 °C

Ambient temperature

-5 °C ... 60 °C

Note on materials

RoHS-compliant

Design

Piston gate valve

Type code

VMPA14

Signal status display

yes

On switching time

12 ms

For use in the food industry

See supplementary material information

Seals material

NBR

Standard nominal flow rate

470 l/min ... 560 l/min

Sealing principle

Soft

Mounting position

Any

Switching time off

20 ms

Max. positive test pulse with 0 signal

400 µs

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Shock resistance

Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

Max. tightening torque for valve mounting

0.65 Nm

Housing material

Die-cast aluminum

Max. negative test pulse on 1 signal

200 µs

CE marking (see declaration of conformity)

As per EU EMC directive

Corrosion resistance class (CRC)

1 - Low corrosion stress

Product weight

77 g

Vibration resistance

Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6

Temperature of medium

-5 °C ... 50 °C

Type of mounting

With through-hole

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

212

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric